From c5595f2d00f3b6aeb174a48075e6b79a06921246 Mon Sep 17 00:00:00 2001 From: James Valleroy Date: Tue, 20 Jan 2026 20:25:54 -0500 Subject: [PATCH] doc: Fetch latest manual Signed-off-by: James Valleroy --- doc/manual/en/APU.raw.wiki | 24 ++++++++++++++---------- doc/manual/en/ReleaseNotes.raw.wiki | 26 ++++++++++++++++++++++++++ doc/manual/es/APU.raw.wiki | 24 ++++++++++++++---------- doc/manual/es/HomeAssistant.raw.wiki | 2 +- doc/manual/es/ReleaseNotes.raw.wiki | 26 ++++++++++++++++++++++++++ 5 files changed, 81 insertions(+), 21 deletions(-) diff --git a/doc/manual/en/APU.raw.wiki b/doc/manual/en/APU.raw.wiki index 66ae1c861..c07aa3b65 100644 --- a/doc/manual/en/APU.raw.wiki +++ b/doc/manual/en/APU.raw.wiki @@ -2,7 +2,7 @@ {{attachment:apu1d.jpg|PC Engines APU 1D|width=632,height=319}} -[[http://www.pcengines.ch/apu1d.htm|PC Engines APU 1D]] is a single board computer with 3 Gigabit ethernet ports, a powerful AMD APU and Coreboot firmware. !FreedomBox images built for AMD64 machines are tested to work well for it. +[[https://www.pcengines.ch/apu.htm|PC Engines APU]] boards are single board computers with 3 Gigabit ethernet ports, a powerful AMD64 APU and Coreboot firmware. !FreedomBox images built for AMD64 machines are tested to work well for [[http://www.pcengines.ch/apu1d.htm|APU1D]] and [[http://www.pcengines.ch/apu3b2.htm|APU3B ]] models and are expected to work also well on the other, very similar versions. '''Important:''' Read [[FreedomBox/Hardware|general advice]] about hardware before building a !FreedomBox with this single board computer. @@ -21,21 +21,26 @@ Although untested, the following similar hardware is also likely to work well wi * [[http://www.pcengines.ch/apu2c4.htm|apu2c4]] * [[http://www.pcengines.ch/apu3a2.htm|apu3a2]] * [[http://www.pcengines.ch/apu3a4.htm|apu3a4]] - * [[http://www.pcengines.ch/apu3b2.htm|apu3b2]] * [[http://www.pcengines.ch/apu3b4.htm|apu3b4]] -=== Download === +=== Installation === !FreedomBox disk [[FreedomBox/Download|images]] for this hardware are available. Follow the instructions on the [[FreedomBox/Download|download]] page to create a !FreedomBox SD card, USB disk, SSD or hard drive and boot into !FreedomBox. Pick the image meant for all amd64 machines. An alternative to downloading these images is to [[InstallingDebianOn/Alix3d2|install Debian]] on the APU and then [[FreedomBox/Hardware/Debian|install FreedomBox]] on it. +An [[https://github.com/huubsch/APU-Installation-HomeAssistant-Freedombox|installation manual]] tested on the APU3B is available on GitHub, including flashing with UEFI-BIOS + === Networking === The first network port, the left most one in the above picture, is configured by !FreedomBox to be an upstream Internet link and the remaining 2 ports are configured for local computers to connect to. === Availability === +PCEngines announced the [[https://www.pcengines.ch/eol.htm|phase-out]] of these boards in June 2023. + +In 2024 [[https://pcengines.github.io/|Dasharo announced the support of APU-boards]] : coreboot + SeaBIOS and coreboot+UEFI. + * Price: 110 - 170 USD (depending on the board and supplier) * [[http://www.pcengines.ch/order.htm|PC Engines]] * [[http://www.pcengines.ch/order.htm|Full list of suppliers]] @@ -43,18 +48,17 @@ The first network port, the left most one in the above picture, is configured by === Hardware === * Open Hardware: No - * CPU: [[http://www.amd.com/en-gb/products/embedded/processors/g-series|AMD G series T40E]] - * RAM: 2 GB DDR3-1066 DRAM - * Storage: SD card, External USB + * CPU: [[http://www.amd.com/en-gb/products/embedded/processors/g-series|AMD G series T40E]]; [[https://teklager.se/en/amd-gx-412tc-cpu-specification/|GX-412TC]], 1 GHz quad core (depending on model) + * RAM: 2 GB DDR3-1066 DRAM - 4 GB (depending on model) + * Storage: SD card, External USB, mSATA module * Architecture: amd64 * Ethernet: 3 Gigabit Ethernet ports - * !WiFi: None, use a [[FreedomBox/Hardware/USBWiFi|USB WiFi device]] - * SATA: 1 m-SATA and 1 SATA + * WiFi: wle200nx / wle600vx / wle900vx miniPCI express wireless modules + * SATA: 1 mSATA-module and 1 SATA === Non-Free Status === * Non-free blobs required: No - * !WiFi: Not available * Boot firmware: [[http://www.pcengines.ch/apu1d.htm|Coreboot]] ## END_INCLUDE @@ -62,4 +66,4 @@ The first network port, the left most one in the above picture, is configured by <> ---- -CategoryFreedomBox +CategoryFreedomBox CategoryFreedomBox diff --git a/doc/manual/en/ReleaseNotes.raw.wiki b/doc/manual/en/ReleaseNotes.raw.wiki index 0443303f4..679b05488 100644 --- a/doc/manual/en/ReleaseNotes.raw.wiki +++ b/doc/manual/en/ReleaseNotes.raw.wiki @@ -8,6 +8,32 @@ For more technical details, see the [[https://salsa.debian.org/freedombox-team/f The following are the release notes for each !FreedomBox version. +== FreedomBox 26.2 (2026-01-20) == + + * gitweb: Fix deleting last repo disables app + * locale: Update translations for Estonian, Italian + * notifications: Close dropdown when clicking outside + +== FreedomBox 26.1 (2026-01-05) == + + * container: Add aliases for start/stop commands + * locale: Update translations for Albanian, Bulgarian, Chinese (Simplified Han script), Czech, Estonian, French, German, Italian, Russian, Turkish, Ukrainian + +== FreedomBox 25.17.1 (2025-12-15) == + +=== Highlights === + + * backups: Set proper permissions for backups-data directory + * minetest: Rename Minetest to Luanti + +=== Other Changes === + + * locale: Update translations for Albanian, Bulgarian, Czech, Estonian, Hindi, Italian, Russian, Turkish, Ukrainian + * minetest: Remove legacy code, use new name, conf, etc. + * transmission: Deal with changes in latest forky package + * transmission: Remove obsolete apache redirects + * vagrant: Enable EFI firmware + == FreedomBox 25.17 (2025-12-08) == === Highlights === diff --git a/doc/manual/es/APU.raw.wiki b/doc/manual/es/APU.raw.wiki index 66ae1c861..c07aa3b65 100644 --- a/doc/manual/es/APU.raw.wiki +++ b/doc/manual/es/APU.raw.wiki @@ -2,7 +2,7 @@ {{attachment:apu1d.jpg|PC Engines APU 1D|width=632,height=319}} -[[http://www.pcengines.ch/apu1d.htm|PC Engines APU 1D]] is a single board computer with 3 Gigabit ethernet ports, a powerful AMD APU and Coreboot firmware. !FreedomBox images built for AMD64 machines are tested to work well for it. +[[https://www.pcengines.ch/apu.htm|PC Engines APU]] boards are single board computers with 3 Gigabit ethernet ports, a powerful AMD64 APU and Coreboot firmware. !FreedomBox images built for AMD64 machines are tested to work well for [[http://www.pcengines.ch/apu1d.htm|APU1D]] and [[http://www.pcengines.ch/apu3b2.htm|APU3B ]] models and are expected to work also well on the other, very similar versions. '''Important:''' Read [[FreedomBox/Hardware|general advice]] about hardware before building a !FreedomBox with this single board computer. @@ -21,21 +21,26 @@ Although untested, the following similar hardware is also likely to work well wi * [[http://www.pcengines.ch/apu2c4.htm|apu2c4]] * [[http://www.pcengines.ch/apu3a2.htm|apu3a2]] * [[http://www.pcengines.ch/apu3a4.htm|apu3a4]] - * [[http://www.pcengines.ch/apu3b2.htm|apu3b2]] * [[http://www.pcengines.ch/apu3b4.htm|apu3b4]] -=== Download === +=== Installation === !FreedomBox disk [[FreedomBox/Download|images]] for this hardware are available. Follow the instructions on the [[FreedomBox/Download|download]] page to create a !FreedomBox SD card, USB disk, SSD or hard drive and boot into !FreedomBox. Pick the image meant for all amd64 machines. An alternative to downloading these images is to [[InstallingDebianOn/Alix3d2|install Debian]] on the APU and then [[FreedomBox/Hardware/Debian|install FreedomBox]] on it. +An [[https://github.com/huubsch/APU-Installation-HomeAssistant-Freedombox|installation manual]] tested on the APU3B is available on GitHub, including flashing with UEFI-BIOS + === Networking === The first network port, the left most one in the above picture, is configured by !FreedomBox to be an upstream Internet link and the remaining 2 ports are configured for local computers to connect to. === Availability === +PCEngines announced the [[https://www.pcengines.ch/eol.htm|phase-out]] of these boards in June 2023. + +In 2024 [[https://pcengines.github.io/|Dasharo announced the support of APU-boards]] : coreboot + SeaBIOS and coreboot+UEFI. + * Price: 110 - 170 USD (depending on the board and supplier) * [[http://www.pcengines.ch/order.htm|PC Engines]] * [[http://www.pcengines.ch/order.htm|Full list of suppliers]] @@ -43,18 +48,17 @@ The first network port, the left most one in the above picture, is configured by === Hardware === * Open Hardware: No - * CPU: [[http://www.amd.com/en-gb/products/embedded/processors/g-series|AMD G series T40E]] - * RAM: 2 GB DDR3-1066 DRAM - * Storage: SD card, External USB + * CPU: [[http://www.amd.com/en-gb/products/embedded/processors/g-series|AMD G series T40E]]; [[https://teklager.se/en/amd-gx-412tc-cpu-specification/|GX-412TC]], 1 GHz quad core (depending on model) + * RAM: 2 GB DDR3-1066 DRAM - 4 GB (depending on model) + * Storage: SD card, External USB, mSATA module * Architecture: amd64 * Ethernet: 3 Gigabit Ethernet ports - * !WiFi: None, use a [[FreedomBox/Hardware/USBWiFi|USB WiFi device]] - * SATA: 1 m-SATA and 1 SATA + * WiFi: wle200nx / wle600vx / wle900vx miniPCI express wireless modules + * SATA: 1 mSATA-module and 1 SATA === Non-Free Status === * Non-free blobs required: No - * !WiFi: Not available * Boot firmware: [[http://www.pcengines.ch/apu1d.htm|Coreboot]] ## END_INCLUDE @@ -62,4 +66,4 @@ The first network port, the left most one in the above picture, is configured by <> ---- -CategoryFreedomBox +CategoryFreedomBox CategoryFreedomBox diff --git a/doc/manual/es/HomeAssistant.raw.wiki b/doc/manual/es/HomeAssistant.raw.wiki index e008f7f04..031c33c30 100644 --- a/doc/manual/es/HomeAssistant.raw.wiki +++ b/doc/manual/es/HomeAssistant.raw.wiki @@ -20,7 +20,7 @@ La app Home Assistant se considera experimental en !FreedomBox, ya que es nueva === Hardware === -Home Assistant puede detectar, configurar, y usar varios dispositivos de la red local. Por ejemplo, si un dispositivo se conecta mediante Wi-Fi o LAN a la misma red que !FreedomBox, Home Assistant puede detectarlo, configurarlo, y usarlo. También se soportan otros protocolos de automatización como Thread, !ZigBee, y Z-Wave, pero requieren hardware adicional para conectarlos a tu !FreedomBox. Por ejemplo, si tienes un sensor de puerta que habla !ZigBee, necesitas conectar un adaptador !ZigBee USB a tu !FreedomBox. Home Assistant podrá entonces detectar y usar el sensor de puerta en la red de !ZigBee. +Home Assistant puede detectar, configurar, y usar varios dispositivos de la red local. Por ejemplo, si un dispositivo se conecta mediante Wi-Fi o LAN a la misma red que !FreedomBox, Home Assistant puede detectarlo, configurarlo, y usarlo. También se soportan otros protocolos de automatización como Thread, !ZigBee, y Z-Wave, pero requieren hardware adicional para conectarlos a tu !FreedomBox. Por ejemplo, si tienes un sensor de puerta que habla !ZigBee, necesitas conectar un adaptador !ZigBee USB a tu !FreedomBox. Home Assistant podrá entonces detectar y usar el sensor de puerta en la red de !ZigBee. '''Nota:''' Si conectas hardware como este a tu FreedomBox después de instalar la aplicación Home Assistant tendrás que deshabilitarla y volverla a habilitar para que lo detecte y lo use. Home Assistant es una solución completa si tu automatización del hogar necesita soportar miles de dispositivos. Puedes consultar si Home Assistant soporta un dispositivo visitando su página de [[https://www.home-assistant.io/integrations/|integraciones]]. Otros dispositivos similares a los soportados podrían estarlo aunque no figuren en la lista. Se recomienda comprar hardware etiquetado como compatible con Home Assistant. diff --git a/doc/manual/es/ReleaseNotes.raw.wiki b/doc/manual/es/ReleaseNotes.raw.wiki index 0443303f4..679b05488 100644 --- a/doc/manual/es/ReleaseNotes.raw.wiki +++ b/doc/manual/es/ReleaseNotes.raw.wiki @@ -8,6 +8,32 @@ For more technical details, see the [[https://salsa.debian.org/freedombox-team/f The following are the release notes for each !FreedomBox version. +== FreedomBox 26.2 (2026-01-20) == + + * gitweb: Fix deleting last repo disables app + * locale: Update translations for Estonian, Italian + * notifications: Close dropdown when clicking outside + +== FreedomBox 26.1 (2026-01-05) == + + * container: Add aliases for start/stop commands + * locale: Update translations for Albanian, Bulgarian, Chinese (Simplified Han script), Czech, Estonian, French, German, Italian, Russian, Turkish, Ukrainian + +== FreedomBox 25.17.1 (2025-12-15) == + +=== Highlights === + + * backups: Set proper permissions for backups-data directory + * minetest: Rename Minetest to Luanti + +=== Other Changes === + + * locale: Update translations for Albanian, Bulgarian, Czech, Estonian, Hindi, Italian, Russian, Turkish, Ukrainian + * minetest: Remove legacy code, use new name, conf, etc. + * transmission: Deal with changes in latest forky package + * transmission: Remove obsolete apache redirects + * vagrant: Enable EFI firmware + == FreedomBox 25.17 (2025-12-08) == === Highlights ===