- This is so that the methods will be checked by mypy. This should help identify
any incorrect initialization of components.
- Remove unused self.repos in GitwebApp.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This includes the envelope size, so the actual size of the message and
attachments is somewhat lower.
Tests:
- Install the app freshly with the patch. Notice that message_size_limit is set
to 102400000 by running 'postconf message_size_limit'.
- Install the app without the patch. Apply patche and notice that the app is
updated. Notice that message_size_limit is set to 102400000 by running 'postconf
message_size_limit'.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
During installation of email app, sievec is run on
/etc/dovecot/freedombox-sieve-after/sort-spam.sieve file to produce a binary
version of the file. However, this file is not available until after the app is
enabled. This is due to the newly introduced drop-in configuration mechanism. To
fix this, during setup, enable the drop-in configuration component responsible
for this file. The component is newly split from the component that deals with
all drop-in components so that not all the drop-in configuration files are
symlinked.
There is no change needed to the app when the drop-in configuration component is
split into multiple components. This is true for all three state of the app;
not-installed, installed-enabled, and installed-disabled.
Tests:
- Install latest code with ./setup.py install. Install the app and it works.
- Uninstall the app and reinstall. It works. There are no warnings that config
file have been replaced with symlinks.
- /etc/dovecot/freedombox-sieve-after has the sort-span.svbin binary sievec
compiled file.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- mypy does not show any errors.
- Installing ejabberd app works. Privileged actions run fine.
- Unit tests work.
- No additional testing was done as type annotations don't have any effect at
runtime.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Try to mark class variables in component classes.
- Leave typing hints generic, such as 'list' and 'dict' where content is usually
not filled, too complex, or context is unimportant.
- backups: Handle failure for tarfile extraction so that methods are not called
on potentially None valued variables.
- backups: Prevent potentially passing a keyword argument twice.
- dynamicdns: Deal properly with outcome of urlparsing.
- ejabberd: Deal with failed regex match
- email: Fix a mypy compliant when iterating a filtered list.
- tor: Don't reuse variables for different typed values.
- tor: Don't reuse variables for different typed values.
- operation: Return None explicitly.
- operation: Ensure that keyword argument is not repeated.
Tests:
- Where only typing hints were modified and no syntax error came up, additional
testing was not done.
- `mypy --ignore-missing-imports .` run successfully.
- Generate developer documentation.
- Service runs without errors upon start up.
- backups: Listing and restoring specific apps from a backup works.
- backups: Mounting a remote backup repository works.
- NOT TESTED: dynamicdns: Migrating from old style configuration works.
- ejabberd: Verify that setting coturn configuration works.
- email: Test that showing configuration from postfix works.
- tor: Orport value is properly shown.
- transmission: Configuration values are properly set.
- users: Running unit tests as root works.
- operation: Operation status messages are show properly during app install.
- ./setup.py install runs
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This will leave /etc/{plinth,freedombox} empty by default making service more
robust to run across various environments and situations. See systemd's
explanation for more details.
- Use Debian maintainer scripts remove all the existing files in
/etc/plinth/modules-enabled.
- Read from /usr/share/freedombox/modules-enabled then from
/etc/plinth/modules-enabled and finally from /etc/freedombox/modules-enabled.
Later read ones override previously read files. Any file pointing to /dev/null
will mean the module must be ignored.
Tests:
- Clean up /etc/plinth, /etc/freedombox and
/usr/share/freedombox/modules-enabled. Run service and notice that files are
getting loaded from development folder using a debug message.
- Run setup.py and notice that files get installed in
/usr/share/freedombox/modules-enabled/ and in the next run they get loaded from
there.
- Create a override file in /etc/plinth/modules-enabled/transmission and notice
that overriden file gets priority over the one in
/usr/share/freedombox/modules-enabled.
- Link the file /etc/plinth/modules-enabled/transmission to /dev/null and notice
that is not loaded.
- Create another file in /etc/freedombox/modules-enabled/transmission and notice
that it overrides the previous two files.
- All affected modules are loaded.
- Build a new Debian package and ensure that upgrading 23.8 to new version
removes are all configuration files.
- Build developer documentation and test that Tutorial -> Full Code and Tutorial
-> Skeleton sections have been updated with references to
-.../modules-enabled/... paths.
- Install quassel and notice that certificates were copied to /var/lib/quassel
directory. Change domain to another domain and notice that certificates were
copied again to that directory.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This improves modularity. Each app brings its own icons in its directory
instead of a centralized directory.
Tests:
- Install an app and notice that the installation notification has the icon.
- Visit an app's page in Apps and System (cockpit) section and ensure that the
app's icon is being shown.
- Visit the Apps and System section and notice that apps' icons are being shown.
- Visit the home page and notice that shortcuts' icons are being shown.
- Visit the URL /plinth/api/0/shortcuts and notice that the URLs for icons are
accessible and lead to proper icon files.
- Build developer documentation and notice that Tutorial -> View and Reference >
Menu pages show the expected updates.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
If Roundcube is not yet installed and the user clicks on 'Launch web client',
redirect to the installation page instead of Apache's Not Found page.
Signed-off-by: nbenedek <contact@nbenedek.me>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
This reverts commit 82104ccf847531944b32810f677cc6cc5c36ccc8.
Due to implementation of a proper view for showing an app with operations, this
workaround should no longer be needed. AppView should not used during or after
the uninstall step.
Tests:
- Functional tests for email pass.
- Refreshing the email app page during uninstall does not lead to an error.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Showing the uninstall progress page fails during uninstall of email app.
Workaround that by handling the errors raised. A better approach is to ensure
that the view is not processed when uninstall operation is in progress.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Warning that exim4 will be removed is incorrectly not shown during email app
installation. Fix that.
Tests:
- Unit tests pass.
- On a fresh testing container, trying to install email app shows the warning
message that exim will be removed. Installing the email app succeeds. exim is
removed during installation.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- When app is freshly installed, nft rules are inserted.
- Trying to connect to local daemon from fbx user fails.
- Functional tests pass.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
I tested this patch on a production server. When trying to authenticate with
Thunderbird, the program will try to log in three times, then disconnect from
the server. This means that one failed login attempt will be logged as four
attempts. For this reason, set maxretry to be 30.
The IP block only affects dovecot, other services are still reachable.
Signed-off-by: nbenedek <contact@nbenedek.me>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Tests:
- DONE: Unit tests work
- DONE: Transmission
- DONE: Enabling/disabling an app with a daemon works: transmission
- DONE: Showing the status of whether the app is enabled with daemon
is-enabled works.
- DONE: A message is shown if app is enabled and service is not running
- DONE: Service is stopped and re-started during backup
- DONE: Adding user to share group during initial setup restarts the service
- Not tested: Enabling/disabling a service with alias works (no such apps)
- DONE: Restarting/try-restarting a service works
- DONE: Masking/unmasking works
- DONE: rsyslog is masked after initial setup
- DONE: systemd-journald is try-restarted during initial setup
- DONE: Avahi, email, security initial setup works
- DONE: Fail2ban is unmasked and enabled
- DONE: Enabling/disabling fail2ban is security app works
- DONE: Enabling/disabling password authentication in SSH works
- ?? Let's encrypt
- Services are try-restarted during certificate setup, obtain, renew
- Not tested: upgrade pagekite from version 1
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work (uninstall test does not work)
- Initial setup works
- Domains are setup
- Home is setup (others don't have permission for /var/mail)
- Aliases configuration is setup
- Postfix is setup
- rspamd is setup
- Changing primary domain works
- Adding/removing domains works
- Error during operations is handle properly: getting dkim key
- Setting up DKIM key when changing, adding/removing domain works
- Showing DKIM key in app page works
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Currently, privileged actions are not allowed under top-level plinth module.
They are only allowed under each app module. Allow privileged actions under
plinth module.
- Currently, privileged actions are not allowed under a sub-module of
'privileged' package. They are allowed only in 'privileged' module. Allow
sub-modules under 'privileged' package.
Tests:
- Email app functional tests pass
- Functional tests for apps using package and service privileged methods pass
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
module.app property usage is greatly reduced because setup() and force_upgrade()
method are now part of App class instead of at the module level. Remove the
remaining minor cases of usage and drop the property altogether.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Primary purpose is to complete the App API and allow for multiple apps to be
present in a module without a single clashing setup() method. Secondary
objective is to get rid of SetupHelper instance simple use App instance instead.
- This brings us closer to not needing to implement setup() method for some of
the typical apps.
- Remove default value None for old_version parameter.
- A valid integer value is always passed to this call.
- The value of None is undefined.
- Simplifies the App API slightly.
- Drop setting 'pre', 'post' values to indicate the stage of setup for the App.
- Simplifies the setup methods significantly. Eliminates a class of
bugs (some of them seen earlier).
- The UI can show a simple 'installing...' or progress spinner instead of
individual stages.
- There are currently many inconsistencies where many operations are not
wrapped in helper.call() calls.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
This is recommended by PEP-0597: https://peps.python.org/pep-0597/
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Discussed during progress call.
- More testing has happened on the app since making it available.
- Will document difficulties with setting up domain name and ISP outgoing
traffic on port 25.
Tests:
- App is available without the advance flag.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
As discussed during progress calls, this is a pre-condition for making the app
generally available (without advanced flag).
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Closes: #1797.
Tests:
- For each affected app, install the app, visit frontpage. Select the shortcut.
Notice that Learn More... link is shown and clicking on the link takes us to the
manual page of the app.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Without the base attribute set, LDAP search returns no results and because of
the lookup failure LMTP will not be able to deliver message even though postfix
has successfully received the messages.
Tests:
- On a fresh container, send a message to a local user using roundcube. The user
should receive the message successfully.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Since FreedomBox does not allow any users but those belonging to 'admin' group
to login, using passwd driver for auth means that only admin can login to
postfix/dovecot. Fix this by reverting to using LDAP driver.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Unified querying, reduce random writes for SD cards, eliminate need for separate
log rotation.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
The site will then redirect to a language specific URL.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Otherwise, the default directives in 10-auth.conf take higher priority.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Not very critical. Reduce complexity. Re-implement later at framework level.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
They are unused. postfix-ldap is needed for LDAP based maps. In dovecot,
authentication happens using PAM.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
There is nothing related to LDAP in the module. It actually configures postfix.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Remove unnecessary complex crash handler needed due to setting the service
configuration in two steps. Merge the two step into one after which crash
handler is not needed.
- Drop '_unsafe' API and verify all keys and values for sanity.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
This is not critically needed in FreedomBox. Implementation is complex. This may
be recreated at framework level to benefit all applications.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
The module does not interact with kernel audit system or is not related to
security logging. The 'privileged' makes us pay more attension.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
A fresh install of clamav-daemon takes up about 1GiB or RAM. Most of this is the
virus signature database and is used regularly for a scan. This makes ClamAV
unsuitable for FreedomBox running on many single board computers. Drop ClamAV
until we start recommending/requiring at least 2GiB of RAM.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- There is no use case for keeping an alias disabled.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
