- This is so that the methods will be checked by mypy. This should help identify
any incorrect initialization of components.
- Remove unused self.repos in GitwebApp.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This includes the envelope size, so the actual size of the message and
attachments is somewhat lower.
Tests:
- Install the app freshly with the patch. Notice that message_size_limit is set
to 102400000 by running 'postconf message_size_limit'.
- Install the app without the patch. Apply patche and notice that the app is
updated. Notice that message_size_limit is set to 102400000 by running 'postconf
message_size_limit'.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
During installation of email app, sievec is run on
/etc/dovecot/freedombox-sieve-after/sort-spam.sieve file to produce a binary
version of the file. However, this file is not available until after the app is
enabled. This is due to the newly introduced drop-in configuration mechanism. To
fix this, during setup, enable the drop-in configuration component responsible
for this file. The component is newly split from the component that deals with
all drop-in components so that not all the drop-in configuration files are
symlinked.
There is no change needed to the app when the drop-in configuration component is
split into multiple components. This is true for all three state of the app;
not-installed, installed-enabled, and installed-disabled.
Tests:
- Install latest code with ./setup.py install. Install the app and it works.
- Uninstall the app and reinstall. It works. There are no warnings that config
file have been replaced with symlinks.
- /etc/dovecot/freedombox-sieve-after has the sort-span.svbin binary sievec
compiled file.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Warning that exim4 will be removed is incorrectly not shown during email app
installation. Fix that.
Tests:
- Unit tests pass.
- On a fresh testing container, trying to install email app shows the warning
message that exim will be removed. Installing the email app succeeds. exim is
removed during installation.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- When app is freshly installed, nft rules are inserted.
- Trying to connect to local daemon from fbx user fails.
- Functional tests pass.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- DONE: Unit tests work
- DONE: Transmission
- DONE: Enabling/disabling an app with a daemon works: transmission
- DONE: Showing the status of whether the app is enabled with daemon
is-enabled works.
- DONE: A message is shown if app is enabled and service is not running
- DONE: Service is stopped and re-started during backup
- DONE: Adding user to share group during initial setup restarts the service
- Not tested: Enabling/disabling a service with alias works (no such apps)
- DONE: Restarting/try-restarting a service works
- DONE: Masking/unmasking works
- DONE: rsyslog is masked after initial setup
- DONE: systemd-journald is try-restarted during initial setup
- DONE: Avahi, email, security initial setup works
- DONE: Fail2ban is unmasked and enabled
- DONE: Enabling/disabling fail2ban is security app works
- DONE: Enabling/disabling password authentication in SSH works
- ?? Let's encrypt
- Services are try-restarted during certificate setup, obtain, renew
- Not tested: upgrade pagekite from version 1
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work (uninstall test does not work)
- Initial setup works
- Domains are setup
- Home is setup (others don't have permission for /var/mail)
- Aliases configuration is setup
- Postfix is setup
- rspamd is setup
- Changing primary domain works
- Adding/removing domains works
- Error during operations is handle properly: getting dkim key
- Setting up DKIM key when changing, adding/removing domain works
- Showing DKIM key in app page works
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
module.app property usage is greatly reduced because setup() and force_upgrade()
method are now part of App class instead of at the module level. Remove the
remaining minor cases of usage and drop the property altogether.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Primary purpose is to complete the App API and allow for multiple apps to be
present in a module without a single clashing setup() method. Secondary
objective is to get rid of SetupHelper instance simple use App instance instead.
- This brings us closer to not needing to implement setup() method for some of
the typical apps.
- Remove default value None for old_version parameter.
- A valid integer value is always passed to this call.
- The value of None is undefined.
- Simplifies the App API slightly.
- Drop setting 'pre', 'post' values to indicate the stage of setup for the App.
- Simplifies the setup methods significantly. Eliminates a class of
bugs (some of them seen earlier).
- The UI can show a simple 'installing...' or progress spinner instead of
individual stages.
- There are currently many inconsistencies where many operations are not
wrapped in helper.call() calls.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Discussed during progress call.
- More testing has happened on the app since making it available.
- Will document difficulties with setting up domain name and ISP outgoing
traffic on port 25.
Tests:
- App is available without the advance flag.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
As discussed during progress calls, this is a pre-condition for making the app
generally available (without advanced flag).
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Closes: #1797.
Tests:
- For each affected app, install the app, visit frontpage. Select the shortcut.
Notice that Learn More... link is shown and clicking on the link takes us to the
manual page of the app.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Since FreedomBox does not allow any users but those belonging to 'admin' group
to login, using passwd driver for auth means that only admin can login to
postfix/dovecot. Fix this by reverting to using LDAP driver.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
They are unused. postfix-ldap is needed for LDAP based maps. In dovecot,
authentication happens using PAM.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
There is nothing related to LDAP in the module. It actually configures postfix.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
The module does not interact with kernel audit system or is not related to
security logging. The 'privileged' makes us pay more attension.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
A fresh install of clamav-daemon takes up about 1GiB or RAM. Most of this is the
virus signature database and is used regularly for a scan. This makes ClamAV
unsuitable for FreedomBox running on many single board computers. Drop ClamAV
until we start recommending/requiring at least 2GiB of RAM.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- managesieve plugin is already enabled due to installation of
dovecot-managesieve.
- Using ManageSieve protocol, clients like Thunderbird (with managesieve addon)
will be able to edit mail filters on the server. The server will perform the
filtering enabling all clients to share the benefits.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Many modules in rspamd including the bayes built-in module depend on
redis-server. Install, run and configure redis-server.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
For simplicity and consistency. Eliminate '_' in the name.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
