Helps: #2410.
- Ensure that diagnostics methods and parameters are type checked so that we can
catch any potential issues.
- Move plinth/modules/diagnostics/check.py to plinth/diagnostic_check.py to
avoid many circular dependencies created. This is due to
plinth.modules.diagnostics automatically imported when
plinth.modules.diagnostics.check is imported. Also app.py is already (type)
dependent on diagnostic_check due to diagnose() method. To make the Check
classes independent of diagnostic module is okay.
Tests:
- Run make check-type.
- Run full diagnostics with following apps installed: torproxy, tor.
- Test to netcat to 9051 in tor works.
- Test 'port available for internal/external networks' in firewall works.
- Test 'Package is latest' works.
- Test 'Access url with proxy' in privoxy works.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
[jvalleroy: Also move tests for diagnostic_check]
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
- This is so that the methods will be checked by mypy. This should help identify
any incorrect initialization of components.
- Remove unused self.repos in GitwebApp.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Enable all apps, and run diagnostics. Diagnostic descriptions are formatted
as expected.
- Change the language to Spanish, and view the diagnostic results. Diagnostic
descriptions are translated as expected.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Ensure that each diagnostic test category can be identified by easy prefix
matching on the test ID.
- Give a different unique IDs each different kind of test. More specific tests
of a type get a different kind of ID.
- Make comparison of diagnostic test results in test cases more comprehensive.
- Simplify code that shows the number if issues identified.
- In many languages, there is complex logic to write plural forms. Plurals
can't be handled by assuming singular = 1 item and plural is > 1. Translation of
messages in Notification does not support plurals properly. Avoid this for now
by using sometimes incorrect plural form.
- For i18n we should avoid joining phrases/words. Words don't always maintain
order after translation.
- Notify about the total number of issues in diagnostics and not just the most
severe category. This is likely to draw more attention and avoid i18n
complexity.
- Dismiss the diagnostic notification if the latest run succeeded completely.
Tests:
- Unit tests pass.
- Diagnostics for following apps works: networks (drop-in config),
apache (daemon, listen address, internal firewall, external firewall),
tor (netcat), torproxy (internal only firewall, torproxy url, torproxy using
tor), privoxy (privoxy url, package available, package latest),
- Untested: Is release file available method in upgrades app.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Set unique check_id for each diagnostic check.
- Result is a string-based enumeration. The default value (NOT_DONE) can be
used for diagnostic checks that have not been completed yet.
- Result is StrEnum so that the return value of check_url can still be used
directly as a diagnostic result.
Closes: #2375
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Try to mark class variables in component classes.
- Leave typing hints generic, such as 'list' and 'dict' where content is usually
not filled, too complex, or context is unimportant.
- backups: Handle failure for tarfile extraction so that methods are not called
on potentially None valued variables.
- backups: Prevent potentially passing a keyword argument twice.
- dynamicdns: Deal properly with outcome of urlparsing.
- ejabberd: Deal with failed regex match
- email: Fix a mypy compliant when iterating a filtered list.
- tor: Don't reuse variables for different typed values.
- tor: Don't reuse variables for different typed values.
- operation: Return None explicitly.
- operation: Ensure that keyword argument is not repeated.
Tests:
- Where only typing hints were modified and no syntax error came up, additional
testing was not done.
- `mypy --ignore-missing-imports .` run successfully.
- Generate developer documentation.
- Service runs without errors upon start up.
- backups: Listing and restoring specific apps from a backup works.
- backups: Mounting a remote backup repository works.
- NOT TESTED: dynamicdns: Migrating from old style configuration works.
- ejabberd: Verify that setting coturn configuration works.
- email: Test that showing configuration from postfix works.
- tor: Orport value is properly shown.
- transmission: Configuration values are properly set.
- users: Running unit tests as root works.
- operation: Operation status messages are show properly during app install.
- ./setup.py install runs
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Rerun setup after disabling the app. App is not enabled.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This will leave /etc/{plinth,freedombox} empty by default making service more
robust to run across various environments and situations. See systemd's
explanation for more details.
- Use Debian maintainer scripts remove all the existing files in
/etc/plinth/modules-enabled.
- Read from /usr/share/freedombox/modules-enabled then from
/etc/plinth/modules-enabled and finally from /etc/freedombox/modules-enabled.
Later read ones override previously read files. Any file pointing to /dev/null
will mean the module must be ignored.
Tests:
- Clean up /etc/plinth, /etc/freedombox and
/usr/share/freedombox/modules-enabled. Run service and notice that files are
getting loaded from development folder using a debug message.
- Run setup.py and notice that files get installed in
/usr/share/freedombox/modules-enabled/ and in the next run they get loaded from
there.
- Create a override file in /etc/plinth/modules-enabled/transmission and notice
that overriden file gets priority over the one in
/usr/share/freedombox/modules-enabled.
- Link the file /etc/plinth/modules-enabled/transmission to /dev/null and notice
that is not loaded.
- Create another file in /etc/freedombox/modules-enabled/transmission and notice
that it overrides the previous two files.
- All affected modules are loaded.
- Build a new Debian package and ensure that upgrading 23.8 to new version
removes are all configuration files.
- Build developer documentation and test that Tutorial -> Full Code and Tutorial
-> Skeleton sections have been updated with references to
-.../modules-enabled/... paths.
- Install quassel and notice that certificates were copied to /var/lib/quassel
directory. Change domain to another domain and notice that certificates were
copied again to that directory.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This improves modularity. Each app brings its own icons in its directory
instead of a centralized directory.
Tests:
- Install an app and notice that the installation notification has the icon.
- Visit an app's page in Apps and System (cockpit) section and ensure that the
app's icon is being shown.
- Visit the Apps and System section and notice that apps' icons are being shown.
- Visit the home page and notice that shortcuts' icons are being shown.
- Visit the URL /plinth/api/0/shortcuts and notice that the URLs for icons are
accessible and lead to proper icon files.
- Build developer documentation and notice that Tutorial -> View and Reference >
Menu pages show the expected updates.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
module.app property usage is greatly reduced because setup() and force_upgrade()
method are now part of App class instead of at the module level. Remove the
remaining minor cases of usage and drop the property altogether.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Primary purpose is to complete the App API and allow for multiple apps to be
present in a module without a single clashing setup() method. Secondary
objective is to get rid of SetupHelper instance simple use App instance instead.
- This brings us closer to not needing to implement setup() method for some of
the typical apps.
- Remove default value None for old_version parameter.
- A valid integer value is always passed to this call.
- The value of None is undefined.
- Simplifies the App API slightly.
- Drop setting 'pre', 'post' values to indicate the stage of setup for the App.
- Simplifies the setup methods significantly. Eliminates a class of
bugs (some of them seen earlier).
- The UI can show a simple 'installing...' or progress spinner instead of
individual stages.
- There are currently many inconsistencies where many operations are not
wrapped in helper.call() calls.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- App installation works. Proxying works when configured with Firefox.
listen-address and permit-access directives are set as expected in the
configuration file.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
- Make sure a user might not run Privoxy as an open proxy, potentially giving
unwanted access to local resources. Only private IP classes are allowed to
connect.
Tests:
- Freshly install privoxy app. permit-access directives are set in the
configuration. Proxy works when tested with a private IP address with Firefox.
- Install privoxy app without the changes. Apply the changes, privoxy setup
should run. permit-access directives are set in the configuration. Proxy works
when tested with a private IP address with Firefox.
- Privoxy works when accessed with IPv4 address (such as 10.42.0.x) and IPv6
address (such as fe80:❌y:z%ve-fbx-testing).
[sunil: Use Spacevars augeus lens to edit the configuration file]
[sunil: Update IP ranges with auto-configuration, IPv6 addresses, etc.]
[sunil: Update description to mention that only local IPs are allowed]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Closes: #1797.
Tests:
- For each affected app, install the app, visit frontpage. Select the shortcut.
Notice that Learn More... link is shown and clicking on the link takes us to the
manual page of the app.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- For zoph, drop dependency on php7.4 as it will cause issues for future
versions of php. The dependency was a hack and not needed for Bullseye and
higher.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
[sunil: isort all files]
[sunil: Remove component in datetime component as managed_packages is empty]
[sunil: Minor refactor in minidlna for consistency]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- In Django 2.2 django.conf.urls.url() is an alias to django.urls.re_path().
- In Django 4.0, url() function will be removed. On Django 3.2, it throws a
warning that this function will be removed in future.
Tests:
- Run unit tests with Django 3.2 and Django 2.2.
- With Django 3.2 there are no warnings when running unit tests and when running
FreedomBox Service.
- Visit a few affected apps with both Django versions.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- ugettext functions will be removed in Django 4.0. Each use emits a warning
when running with Django 3.2. Since we have warnings enabled in developer mode,
we see quite a few messages because of this.
- ugettext is already a simple alias of gettext. So, no regressions are
expected.
Tests:
- Accessing an affected app in UI with Django 3.2 and Django 2.2 works fine.
- Using Django 3.2 there are no warnings related to removal of ugettext
functions.
- Ran regular unit tests.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Undo a minor isort refactor in searx]
[sunil: Change the menu label to 'Donate']
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Add pytest hooks to ignore all functional tests if pytest_bdd is not
installed.
- Update pytest hooks to skip tests in file named 'test_functional.py' if
--include-functional argument is not provided.
- Move functional_tests/install.py into plinth/tests/functional and update
reference in Vagrantfile.
- Move scenario files into individual app folders. Rename them after the app
they are testing. Merge TODO items listed in todo.org into corresponding feature
files.
- Add test_functional.py in each app to build tests from the features file using
pytest_bdd.
- Move all step_definitions, support and data into plinth/tests/functional/.
Include all step_definitions from conftest.py. Update to relative imports
instead of absolute imports.
Tests performed:
- Run py.test-3 --collect-only shows all functional tests and lists 574 tests.
No errors show that name of feature files are correct. The number says that all
functional test features are included.
- Remove pytest_bdd (or modify the import name) and run py.test-3 --collect-only
skips collecting all functional tests and shows only 300+ tests.
- Run functional tests for a few apps with py.test-3 --include-functional -m
app. For storage, deluge.
- Run unit tests with py.test-3. Functional tests are listed by skipped.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Handle groups needed by an app.
- Handle reserved usernames for an app.
- Updated documentation
- Updated unit tests
Tests performed:
- Reserved usernames: ez-ipupd, ejabberd, Debian-minetest, mldonkey,
monkeysphere, mumble-server, privoxy, quasselcore, radicale, debian-tor,
debian-transmission
- Reserved usernames checks should work in the following forms:
- Create user
- Update user
- First boot user creation
- Full list of available groups should appear in following cases:
- Create user form
- Update user form
- Full list of groups should get created in Django DB during:
- Update user form display
- First boot form save
- When updating the last admin user, the 'admin' group choice is checked
and disabled.
- Following groups show up (sorted by group name):
- bit-torrent: Download files using BitTorrent applications
- git-access: Read-write access to Git repositories
- i2p: Manage I2P application
- wiki: View and edit wiki applications
- minidlna: Media streaming server
- ed2k: Download files using eDonkey applications
- freedombox-share: Access to the private shares
- web-search: Search the web
- syncthing: Administer Syncthing application
- feed-reader: Read and subscribe to news feeds
- admin: Access to all services and system settings
- Directory validation form checks for write permissions for following apps:
- deluge with debian-deluged user
- transmission with debian-transmission user
- Sharing app should show all the groups in add/edit share forms
- The following apps should get added to share group during setup:
debian-transmission
debian-deluged
- Unit tests pass
- Functional tests for users and groups pass
- Test that an app (example syncthing) provides the necessary
permissions to users in that group (but not in admin group).
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
[sunil: Fix i18n of group descriptions]
[sunil: Update developer documentation]
[sunil: Separate out cosmetic changes]
[sunil: Fix component ID for mumble]
[sunil: sharing: Remove unneeded dependency on users app]
[sunil: Implement better API for getting groups in component]
[sunil: Fix incorrect regression change ttrss app]
[sunil: Make iterating over gourps more readable]
[sunil: Improve tests, drop single use fixtures]
[sunil: Simplify test_view.py fixture]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Tested-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Remove the need to pass all the individual information elements to the AppView
separately. This eliminates many issues with elements that were mistakenly not
sent to AppView. Also reduces a lot of code duplication.
- Create App classes for power and sso for consistency.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Reuse the app_id already available to the view.
- Implement automatically detecting if an app has implemented diagnostics.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- add and use "icon_filename" property to almost all of the modules
being displayed in the apps page
- sharing and tor modules do not seem to be using setup.html template
file and so the variable is not added to their __init__.py files,
therefore the icon will not be displayed on these app pages.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Turn frontpage shortcut into an App component. Add tests and full
documentation.
- Overridden implementations for tahoe, diaspora, mediawiki shortcuts to handle
special cases. Special handling for ikiwiki.
- Extend App API for removing and retrieving a component.
- Add clients information into shortcuts to avoid hacks when presenting
shortcuts to Mobile devices via API.
- Fixed unnecessary stripping and adding of '/' when setting home page redirect
URLs. This fixes problem with setting Cockpit as home page.
- Replaced the use of term 'app' in favor of 'shortcut' as the term when setting
frontpage shortcuts as home page.
- JSXC shortcut does not require login.
- Don't show shadowsocks for anonymous users.
- Simplify showing selected shortcut details.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
- Introduce base class for all apps that will contain components. With
unittests.
- Introduce base classes for components. With unittests.
- Turn Menu class into an app component.
- Further cleanup Menu class.
- Update tests.
- Maintain a global list of menu items and look them up easily. Generalize
such that subsubmenus can later be merged into Menu class.
- Cleanup scope of main menu initialization.
- Use None instead of empty strings for various values. Ensure that
printing short_description does not show 'None' in output.
- Use enable/disable instead of promote/demote.
- Use menu component in all apps.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
- Add 'secondary' flag to menu items.
- Mark apps as 'secondary' when disabled.
- Extend TemplateView for apps index.
- Add card-container for disabled apps.
Closes#1309
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Adjust the template so that it uses glyphicons for sys page and logos for the app page
- Add logos for missing apps (tor and sharing) and their licences
Signed-off-by: Hemanth Kumar Veeranki <hems.india1997@gmail.com>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Closes#930
- Make targets to download wiki pages of each service
- Add post-processor script for DocBook file processing
Signed-off-by: Joseph Nuthalapati <njoseph@thoughtworks.com>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
