Tests:
- DONE: Functional tests work
- DONE: Initial setup work on btrfs filesystem
- Not tested: Upgrading from older versions
- DONE: After backup is restored for snapshot app, snapper daemon is reloaded
- DONE: All configuration values are updated as expected
- DONE: Values show up correctly in app page
- DONE: Configuration files contain the proper values
- DONE: New snapshot can be created, gets listed in the snapshots list
- DONE: Enabling/disabling apt snapshotting works
- DONE: Configuration file is updated
- DONE: App page shows the correct value
- DONE: Deleting snapshots works, snapshot is removed from the list
- FAIL: Rolling back snapshots works (#2144)
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Initial setup works.
- Empty Apache configuration file is created
- Adding a share works all the information added is shown during editing.
Configuration file is updated as expected.
- List of shares is shown as expected.
- When editing a share, information about share is shown correctly. Editing
works are expected.
- Removing a share works.
- Trying to add share with a name that already exists throws a proper error
message.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Initial setup works
- Setting configuration works, correct configuration is updated in the
configuration files and app shows the values correctly.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- When the app is disabled, configuration can still be updated. Attempts to
enable the setting while app is disabled seemingly fail.
Tests:
- Functional tests pass.
- When public access is enabled and app is disabled, the page still shows public
access as enabled.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Initial setup works
- UWSGI configuration is created and daemon is running.
- Enabling and disabling public access works. Public access file is
created/removed. App page shows current value. If exception is raised, error
is shown properly.
- Setting safe search to all three values works. Configuration file is updated
properly. App page shows current value properly. If exception is raised, error
is shown properly.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- When the app is enabled, if the log path does not exist, it is created
/var/log/radicale.
- Not tested: upgrading from older version to 3.x
- Setting the access rights works. It is reflected in the app page and
configuration file /etc/radicale/config.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Setting the domain updates the configuration file, reflects in the app page
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Reboot works, the process works in the background showing apps page
- Shutdown works, the process works in the background showing apps page
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Initial setup succeeds
- Configuration can be set and new configuration is properly reflected in app
page and configuration files.
- A new service can be added and reflects in configuration files.
- Service can be deleted and reflects in configuration files.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests pass.
- Initial setup completes successfully and does not take very long time.
- Profiles can be downloaded successfully and imported.
- A client an use them to connect.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Initial setup of during first setup works
- When there are no wired network interfaces
- When there is 1 wired network interface
- When there is one wifi interface. wired network is setup as 'external'
WAN. (simulated with edit of _get_interfaces())
- When there are no wifi interfaces. wired network is setup as 'internal'
WAN.
- When there are multiple wired network interfaces
- First one is setup as WAN rest as shared
- When there is one wifi interface, interface is setup as shared.
- When there are no wifi interfaces
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Setting the media directory updates the configuration file. Newly set
directory is shown on the app page after update.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Updating the configuration values works
- Enable/disable works
- Editing the max players works
- Changing all of them together and one at a time
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests works (when libpam-tmpdir is removed)
- Initial setup works
- Website is accessible
- sqlite file is created
- Database update is triggered
- Changing skin/admin password/public registrations/private mode/site name works
- Configuration file is updated
- App page shows the current value
- Website is reflects the correct value
- When private mode is enabled, public registrations are automatically
disabled
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Initial setup works
- Setup after install works
- Domain is properly set
- Configure domains is properly shown in the app page
- Updating TURN configuration works
- Configuration file is updated
- Enabling/disabling public registration works
- Configuration file is updated
- App page show current status
- FAIL: Daemon fails to start when public registration is enabled
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Initial setup succeeds
- infinoted user/group is added to the system
- systemd service is created and service is running after install
- Directories /var/lib/infinoted, /etc/infinoted and /var/lib/infinoted/sync
are created with infinoted as owner and group.
- Certificates /etc/infinoted/infinoted-{cert,key}.pem are created with
infinoted as owner and group.
- Enabling/disabling works and enables/disables the service
- Gobby is able to connect to the server and create a document
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work.
- Initial setup works
- /var/www/ikiwiki is created
- Shortcuts are created for existing sites after restarting FreedomBox service.
- Creating a new wiki works.
- The site is listed in the list of blogs/wikis
- Creating a new blog works.
- The site is listed in the list of blogs/wikis
- Deleting a wiki works
- Deleting a blog works
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work.
- Initial setup works
- Sometimes fails to write tunnel configuration (See #2127).
- Favorites are created as listed in FAVORITES in resources.py
- Tunnels are created: I2P HTTP Proxy, I2P HTTPS Proxy, Irc2P
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Accessing help/status-log/ works and last 100 logs lines are shown.
- When there are no logs, '--no entries--' message is shown.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functions tests work
- Initial setup works
- Global default branch is set to 'main'
- Creating an repository works
- Cloning a repository works
- Progress is shown on the app page
- List of repositories is shown properly in the app page
- Deleting a repo works
- Editing a repository works
- Repository information is shown properly in the form
- Renaming a repository
- Setting description
- Setting owner
- Setting a repository private/public
- Setting default branch (list of branches is shown properly)
- Error is thrown properly when a remote repository does not exist
- Errors are handled properly when creating/editing/deleting repo
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- If a daemon is not-running, we already show an error message to the user. Use
that mechanism instead of the custom one.
Tests:
- Functional tests work.
- Initial setup for firewall on first boot works.
- Default zone of the firewalld is set to external in /etc/firewalld.conf
- Status of various apps is shown properly in the app page
- If firewalld is not running, the app page is still displayed properly and
message that firewalld is not running is shown.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work (uninstall test does not work)
- Initial setup works
- Domains are setup
- Home is setup (others don't have permission for /var/mail)
- Aliases configuration is setup
- Postfix is setup
- rspamd is setup
- Changing primary domain works
- Adding/removing domains works
- Error during operations is handle properly: getting dkim key
- Setting up DKIM key when changing, adding/removing domain works
- Showing DKIM key in app page works
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work (backup test intermittent failure)
- Initial setup works
- Domain name is configured properly
- FAIL: Changing hostname works (See #2276)
- Adding a domain to the system works
- Current list of domains shown properly in app page
- Setting list of domains works
- Showing TURN configuration works
- Updating TURN configuration in coturn page works
- Enabling/disabling MAM status works
- Configure file is updated
- App page shows correct status
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work.
- Initial setup works.
- Setting the setup version to 1 and running the service upgrades to version 2.
During this, export_config() and clean() work successfully.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Initial setup of coturn succeeds
- Configuration file is created and required configuration is set.
- Coturn is restarted
- Coturn configuration is shown on app page.
- Changing the domain succeeds and coturn configuration reflects the new domain.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Running flake8 as in .gitlab-ci.yml works.
- Setting the domain name again to update /etc/hosts file after hostname change
works
- Setting the domain name from the text box works. New domain name is read back
and shown properly.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Running flake8 as in .gitlab-ci.yml works.
- Changes the hostname works and it is updated in /etc/hostname
- Avahi daemon is restarted
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Initial setup succeeds
- (not tested, functionality removed later) During initial setup, if
/etc/apache2/conf-available/freedombox.conf has home page other than /plinth,
it will be changed to /plinth.
- Setting the home page to Apache default, plinth, or an app works.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Unit and functional tests work.
- Creating a library works.
- An error while creating library shows as proper message.
- Deleting a library works.
- An error while deleting library shows as proper messages.
- Creating/deleting library reflects properly in the list of libraries.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Initial setup:
- Creates zones directory
- Write default configuration
- named is restarted
- Forwarders
- Setting forwarders works as expected.
- Current list of forwarders is shown as expected
- List of served domains is shown properly
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests
- Initial setup
- Sets the domain to freedombox.local (SITENAME)
- Default permissions are set to read
- Three passwords with varying permissions are create by default
- Current configuration is retrieved properly (default permissions, passwords)
- Adding passwords works, they are list as expected
- With or without comment
- Removing password works
- Setting default permissions works
- Untested:
- Upgrade from version 1
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Initial setup works when a new container is created
- When transmission is enabled/disabled, the web configuration for it is
enabled/disabled.
- When radicale is enabled/disabled, the uwsgi configuration for it is
enabled/disabled.
- Sharing web configuration is disabled during backup and re-enabled.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
We depend on systemd for many things anyway and this code path is never tested.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
There is not much additional risk by doing this. This is needed in case of some
exceptional cases such as storage.validate_directory() which need to run as a
different user other than root.
Tests:
- Directory validation works in transmission and deluge.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Currently privileged actions use stdout for returning the results. If any of the
sub-processes accidentally output to stdout, decoding errors occur. Prevent this
by opening a pipe to the privileged action and returning the output in that
pipe.
Tests:
- Run unit tests
- Functional tests for other apps pass
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Currently, privileged actions are not allowed under top-level plinth module.
They are only allowed under each app module. Allow privileged actions under
plinth module.
- Currently, privileged actions are not allowed under a sub-module of
'privileged' package. They are allowed only in 'privileged' module. Allow
sub-modules under 'privileged' package.
Tests:
- Email app functional tests pass
- Functional tests for apps using package and service privileged methods pass
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Provides a Version class wrapper around apt_pkg.version_compare.
Replaces distutils.version which is deprecated.
Closes: #2261.
Tests:
- Install ejabberd.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Add two more version comparison tests]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Closes: #2263
- matrix-synapse >= 1.65.0-1 requires python3-canonicaljson >= 1.6.2~
Tests:
- On a stable Vagrant Box, matrixsynapse app is not installable.
- With the changes, start FreedomBox service, setup will run on the upgrades
module and /etc/apt/preferences.d/51freedombox-apps.conf will be changed to
include the new entry. After this, matrix-synapse app is installable.
Signed-off-by: nbenedek <contact@nbenedek.me>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Use AppView for app page.
- Handle post enable/disable activities within the App class.
- Use Operation class to perform configuration instead of custom mechanism. Drop
all the older code for it.
Tests:
- DONE: Run functional tests
- DONE: Enabling Tor
- DONE: Enables the service
- DONE: Updates the firewall ports
- DONE: Adds hidden service domain to names app
- DONE: Shows app enabled
- DONE: Firewall ports are opened
- DONE: Disabling Tor
- DONE: Disables apt transport over Tor
- DONE: Firewall ports are closed
- DONE: Shows app disabled
- DONE: Onion domain is removed from names app
- DONE: App page
- DONE: Running/not-running status is shown properly based on whether tor
daemon is running.
- DONE: Port forwarding information is shown properly.
- DONE: When hidden service is enabled, status of hidden services is shown
- DONE: Configuration update
- DONE: Form shown correct status of the option
- DONE: When configuration is being updated, operation progress is shown
- DONE: Page refreshes once in 3 seconds during operation. Refresh stops after
operation.
- Once the operation is complete, success or error message is shown
- DONE: Javascript to show/hide upstream bridges text box works
- DONE: Javascript to enable/disable relay checkboxes works
- DONE: Operation does not show notification.
- DONE: Enabling apt over Tor does not work when app is disabled
- DONE: When configuration is changed, the message 'Settings unchanged' is not
shown.
- DONE: If an error is thrown during configuration, an error message is shown
properly.
- DONE: Tor is restarted after configuration update and hidden service domains
is updated.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
1. Install Janus on stable system.
2. Start a dist-upgrade to testing.
- Janus is held during dist-upgrade.
- Janus is force upgraded by Plinth after dist-upgrade is complete.
Closes: #2254.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Tests:
- Functional tests pass
- Same tests as previous patch for setting logging to syslog.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- On a fresh container, install roundcube. log_driver is set to syslog in
freedombox-config.conf.
- Install roundcube without the changes. Enable local only. Apply the changes
and restart service. roundcube setup is run. log_driver is set to syslog in
freedombox-config.conf. Setting is still local-only.
- Install roundcube without the changes. Disable local only. Apply the changes
and restart service. roundcube setup is run. log_driver is set to syslog in
freedombox-config.conf. Setting is still not local-only.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
