Tests:
- DONE: Unit tests work
- DONE: Transmission
- DONE: Enabling/disabling an app with a daemon works: transmission
- DONE: Showing the status of whether the app is enabled with daemon
is-enabled works.
- DONE: A message is shown if app is enabled and service is not running
- DONE: Service is stopped and re-started during backup
- DONE: Adding user to share group during initial setup restarts the service
- Not tested: Enabling/disabling a service with alias works (no such apps)
- DONE: Restarting/try-restarting a service works
- DONE: Masking/unmasking works
- DONE: rsyslog is masked after initial setup
- DONE: systemd-journald is try-restarted during initial setup
- DONE: Avahi, email, security initial setup works
- DONE: Fail2ban is unmasked and enabled
- DONE: Enabling/disabling fail2ban is security app works
- DONE: Enabling/disabling password authentication in SSH works
- ?? Let's encrypt
- Services are try-restarted during certificate setup, obtain, renew
- Not tested: upgrade pagekite from version 1
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work
- Initial setup succeeds
- Configuration can be set and new configuration is properly reflected in app
page and configuration files.
- A new service can be added and reflects in configuration files.
- Service can be deleted and reflects in configuration files.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
module.app property usage is greatly reduced because setup() and force_upgrade()
method are now part of App class instead of at the module level. Remove the
remaining minor cases of usage and drop the property altogether.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Primary purpose is to complete the App API and allow for multiple apps to be
present in a module without a single clashing setup() method. Secondary
objective is to get rid of SetupHelper instance simple use App instance instead.
- This brings us closer to not needing to implement setup() method for some of
the typical apps.
- Remove default value None for old_version parameter.
- A valid integer value is always passed to this call.
- The value of None is undefined.
- Simplifies the App API slightly.
- Drop setting 'pre', 'post' values to indicate the stage of setup for the App.
- Simplifies the setup methods significantly. Eliminates a class of
bugs (some of them seen earlier).
- The UI can show a simple 'installing...' or progress spinner instead of
individual stages.
- There are currently many inconsistencies where many operations are not
wrapped in helper.call() calls.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- For zoph, drop dependency on php7.4 as it will cause issues for future
versions of php. The dependency was a hack and not needed for Bullseye and
higher.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- When configured, upon startup, pagekite domains shows up in the names module.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
[sunil: isort all files]
[sunil: Remove component in datetime component as managed_packages is empty]
[sunil: Minor refactor in minidlna for consistency]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- ugettext functions will be removed in Django 4.0. Each use emits a warning
when running with Django 3.2. Since we have warnings enabled in developer mode,
we see quite a few messages because of this.
- ugettext is already a simple alias of gettext. So, no regressions are
expected.
Tests:
- Accessing an affected app in UI with Django 3.2 and Django 2.2 works fine.
- Using Django 3.2 there are no warnings related to removal of ugettext
functions.
- Ran regular unit tests.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Undo a minor isort refactor in searx]
[sunil: Change the menu label to 'Donate']
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Due to a minor regression with init() method refactoring:
- Pagekite tries to check if it is enabled even when it is not installed. This
is an unnecessary check.
- Pagekite tries to remove domains from name services even when it is not
installed. This could have unnecessary consequences.
Fix this by checking if Pagekite is installed and perform name services updating
only if service is enabled.
Tests:
- Enable pagekite and configure it. When FreedomBox is restarted, Pagekite kite
is announced as domain and shown in Name Services.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
This is to make Pagekite use certficates shipped by Debian. Otherwise by
default, it uses internally shipped certificates that may be outdated. See:
https://pagekite.wordpress.com/2020/05/30/tls-certificate-validation-issues/
Tests performed:
- Without the patch, configure pagekite with a proper account. Notice that
pagekite fails to connect to the server due to SSL failures.
- Stop FreedomBox, apply the patch, run ./setup.py and run FreedomBox. File
/etc/pagekite.d/90_freedombox_certs.rc is present. Pagekite is restarted by
restarts. It start connecting to the server successfully.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
[jvalleroy: Fix typo in comment]
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Turn some methods in action script to private to improve abstraction.
- Always enable the predefined services when setting the configuration for the
first time.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- Remove the need to pass all the individual information elements to the AppView
separately. This eliminates many issues with elements that were mistakenly not
sent to AppView. Also reduces a lot of code duplication.
- Create App classes for power and sso for consistency.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- The code was never used by end users.
- The code was expected to be used long back but the plans didn't materialize.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Introduce base class for all apps that will contain components. With
unittests.
- Introduce base classes for components. With unittests.
- Turn Menu class into an app component.
- Further cleanup Menu class.
- Update tests.
- Maintain a global list of menu items and look them up easily. Generalize
such that subsubmenus can later be merged into Menu class.
- Cleanup scope of main menu initialization.
- Use None instead of empty strings for various values. Ensure that
printing short_description does not show 'None' in output.
- Use enable/disable instead of promote/demote.
- Use menu component in all apps.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Closes#930
- Make targets to download wiki pages of each service
- Add post-processor script for DocBook file processing
Signed-off-by: Joseph Nuthalapati <njoseph@thoughtworks.com>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Remove apps and system modules and merge their views into main views.
- Move main_menu from cfg into menu.py.
- Remove dependencies of other modules on apps and system modules.
- Update tests.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
This can then be used by a privileged action to verify that packages
requested for installation are in fact valid. This slightly improves
security of those privileged actions.
After the recent cleanup, pagekite no longer shows description before
installation. Only after installation does it show the insturctions
about why it is needed. Also in the description {box_name} is not
substituted and there are incorrect escape sequences.
Revert this earlier change that causes these regressions.
This app rightfully belongs in system configuration section instead of
the application section. It is setup once and not used regularly. It
is not service but enabler for other services.
Currently menu items are shown in alphabetical order in applications and
no clear order in system configuration. This is done using static
weights for menu items based on English names that does not work for
other locales.
Sorting can't be done at the time of adding menu items as users of
multiple locales may use the interface at the same time.
Implement a sorting mechanism based on existing order as well as labels
of menu item. This allows the flexiblity of grouping menu items in
future as it may be need for system configuration. In case of help menu
Remove sort order for all modules except for help menu as here we want
that specific order.
- adapted all modules to not use views.ConfigurationView anymore
- removed templates that are not needed anymore
- no more implicit 'enabled' and 'get_status' functions in __init__.py files
- (more coherent/explicit use of Django functionality)
- The last part of the module import path is the module name. This also
becomes the Django app name. Apps names have to be unique. Hence,
there is no scope for two different modules with same name but
different load path to exist in the project.
- Most uses of list of loaded modules are dealing with app names instead
of full module load path. This is due to the fact that Django deals
with app names and not module paths.
- It is also somewhat clumsy to access a loaded module as we are
re-importing every time to get access module.
- Simplify all of the above by using app names are module identifiers
and maintaing an ordered dictionary of app names to loadded modules.
- Remove unused imports.
- Minor styling fixes.
