Tests:
- Config app description is as expected.
- Config form does not show domain name field anymore.
- Submitting the form with changes works.
- Names app has correct link for configuring static domain name. Clicking it
takes to page for setting domain name.
- On startup, static domian name signal is sent properly if set. Otherwise no
signal is send.
- Change domain name form shows correct value for current domain name.
- Change domain name form sets the value for domain name properly.
- Page title is correct.
- Validations works.
- Add/remove domain name signals are sent properly.
- Success message as shown expected
- /etc/hosts is updated as expected.
- Unit tests work.
- Functional tests on ejabberd, letsencrypt, matrix, email, jsxc, openvpn
- After freshly starting the service. Visiting names app shows correct list of
domains.
- ejabberd:
- Installs works as expected. Currently set domain_name is setup properly.
Copy certificate happens on proper domain.
- Changing the domain sets the domain properly in ejabberd configuration.
- Ejabberd app page shows link to name services instead of config app.
Clicking works as expected.
- letsencrypt:
- When no domains are configured, the link to 'Configure domains' is to the
names app.
- matrix-synapse:
- Domain name is properly shown in the status.
- email:
- Primary domain name is shows properly in the app page.
- Setting new primary domain works.
- When installing, domain set as static domain name is prioritized as primary
domain.
- jsxc:
- Show the current static domain name in the domain field. BOSH server is
available.
- openvpn:
- Show the current static domain in profile is set otherwise show the current
hostname.
- If domain name is not set, downloaded OpenVPN profile shows hostname.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Tests:
- Config app description is as expected.
- Config form does not show hostname anymore.
- Submitting the form with changes works.
- Names app has correct link for configuring Local Domain Name. Clicking it
takes to page for setting hostname.
- Avahi shows the current .local domain correctly in Names app.
- Change hostname form shows correct value for current hostname.
- Change hostname form sets the value for hostname properly.
- Page title is correct.
- Validations works.
- Pre/post hostname change signals are sent properly
- Success message as shown expected
- hostnamectl shows the set domain
- If domain name is not set, downloaded OpenVPN profile shows hostname.
- Unit tests work.
- Functional tests on names/config/avahi apps work.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Tests:
- Running flake8 as in .gitlab-ci.yml works.
- Setting the domain name again to update /etc/hosts file after hostname change
works
- Setting the domain name from the text box works. New domain name is read back
and shown properly.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Running flake8 as in .gitlab-ci.yml works.
- Changes the hostname works and it is updated in /etc/hostname
- Avahi daemon is restarted
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- None disables logging altogether. This is useful when we want to prevent
FreedomBox from collecting IP addresses of visitors and other sensitive
information.
- Volatile logs are kept in RAM until the system is rebooted. Only 5% of RAM
will be used at most and only 2 days worth of logs are kept.
- Permanent will store logs into /var/log/journal. systemd-journald defaults
will apply. 10% of disk capacity is used at most, capped at 4GiB. Also logging
will stop if free space is below 15%. Maximum of 100 files are kept. No time
based cleanup is done.
Tests:
- Set the logging mode to disabled. Observe that `journalctl -f` does not show
any logs (say when performing plinth actions).
- Set the logging mode to volatile. Observe that `journalctl` shows that logging
is set to /run/log/journal/ and 5% of available memory is set as maximum.
- Set the logging mode to persistent. Observe that `journalctl` shows that
logging is set to /var/log/journal/ and 10% of disk space is set as maximum.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- ugettext functions will be removed in Django 4.0. Each use emits a warning
when running with Django 3.2. Since we have warnings enabled in developer mode,
we see quite a few messages because of this.
- ugettext is already a simple alias of gettext. So, no regressions are
expected.
Tests:
- Accessing an affected app in UI with Django 3.2 and Django 2.2 works fine.
- Using Django 3.2 there are no warnings related to removal of ugettext
functions.
- Ran regular unit tests.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
This was used before to ensure the domain name was ASCII. However, str
does not convert to ASCII in Python 3.
Note that in config module, which sets the system domain name, the
domain is already restricted to alphanumerics, hyphen, and period.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Domain name is not case sensitive, but Let's Encrypt certificate paths
use lower-case domain name.
Closes: #1964.
Tests: Config functional tests passed.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
If at least one related service/daemon is not running, show the alert if app
is enabled, otherwise set alert as hidden (for functional tests).
Closes#1752
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
[sunil: Minor code simplification in app template, status section]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Remove the need to pass all the individual information elements to the AppView
separately. This eliminates many issues with elements that were mistakenly not
sent to AppView. Also reduces a lot of code duplication.
- Create App classes for power and sso for consistency.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- move header section to it's own file so that it can be imported across
the app (app.html, simple_app.html, setup.html)
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Follow common code so that extending becomes easier.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
If the domain name is not properly set before calling post_hostname_change
signal, then in the signal handlers config.get_domainname() returns an empty
string. So, call the post_hostname_change signal only after fully finishing the
hostname related changes, that is, after setting back the original domain name
too.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Turn frontpage shortcut into an App component. Add tests and full
documentation.
- Overridden implementations for tahoe, diaspora, mediawiki shortcuts to handle
special cases. Special handling for ikiwiki.
- Extend App API for removing and retrieving a component.
- Add clients information into shortcuts to avoid hacks when presenting
shortcuts to Mobile devices via API.
- Fixed unnecessary stripping and adding of '/' when setting home page redirect
URLs. This fixes problem with setting Cockpit as home page.
- Replaced the use of term 'app' in favor of 'shortcut' as the term when setting
frontpage shortcuts as home page.
- JSXC shortcut does not require login.
- Don't show shadowsocks for anonymous users.
- Simplify showing selected shortcut details.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
This supports the use case of hosting a website on FreedomBox at Apache's web
root. This makes the assumption that index.html is a file in the website.
Signed-off-by: Joseph Nuthalapati <njoseph@thoughtworks.com>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Move the file editing code to actions/config since it must be executed by a
super user.
Signed-off-by: Joseph Nuthalapati <njoseph@thoughtworks.com>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Closes#930
- Make targets to download wiki pages of each service
- Add post-processor script for DocBook file processing
Signed-off-by: Joseph Nuthalapati <njoseph@thoughtworks.com>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
