- When port forwarding configuration is not required in the router, don't show
the ports information.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- API can be consumed by other apps.
- Consistently, get/set store keys and default values without repeated code.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- Start showing port ranges properly.
- Fixes issue with Coturn TURN relay ports not being shown.
Closes: #1851.
Tests:
- Visit each of affected apps and see the port forwarding information. The
information is same as before.
- HTTP and HTTPS ports are not shown.
- Coturn app shows additional port ranges for TURN relay ports.
- Shadowsocks app does not show port forwarding information as it is internal
only.
- Visit one of the apps not effected by the patch. There is no section related
to port forwarding.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Solves #1907 for JSXC and Sharing pages. WireGuard is not yet included in the
manual and missing pages show an ugly error.
Signed-off-by: Fioddor Superconcentrado <fioddor@gmail.com>
[sunil: Formatted using yapf]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Prevent leaking private info through Tor onion service or Pagekite.
Tests:
- When starting plinth, apache setup is run. Status module is
disabled, and apache2 is restarted.
- sunil: After upgrade, status page is not available.
- sunil: mod_status is available in stable (2.4.38-3+deb10u3) and
testing/unstable (2.4.46-1).
Closes: #1935.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Tested-by: Sunil Mohan Adapa <sunil@medhas.org>
* Fixes the gitweb app initalization when there are no public
repositories and the apache2 configuration gitweb-freedombox-auth has
not been enabled before (this may happen when the git repositories or
apache2 configuration has been modified outside the plinth web UI).
* Fix comment in the gitweb-freedombox-auth.conf apache2 configuration
file.
Fixes#1928
Tests performed:
* The gitweb app unit and functional tests pass.
* Configured all gitweb repositories as private. Stopped the plinth
service. Disabled the apache2 configuration gitweb-freedombox-auth.
Then starting the plinth service succeeds and gitweb-freedombox-auth
configuration gets enabled.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
The word "Manual" means 'user guide' in case of help and 'not automatically' in
case of networking app.
After change, POT file is produced as follows:
msgctxt "User guide"
msgid "Manual"
msgstr ""
msgctxt "Not automatically"
msgid "Manual"
msgstr ""
Closes: #1922.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
Tests:
- Click on diagnostics menu item in any app. Notice that running status does not
show up.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Stick to a subset of allowed configuration file syntax (full syntax). Only KEY
= VALUE statements are allowed. Values can be full JSON (valid python).
- Use augeas to read as key/value pairs and then parse the values in JSON.
- Add convenience methods to read and write configuration files.
- Read the entire configuration file in a single action.
- Internationalize the permission strings displayed to the user.
- Pass password during remove-password operation via stdin instead of command
line.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Since a password without any permissions is not useful.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Make them slightly more verbose. Avoid text in parenthesis.
- 'Web link' is likely more easily associated with URL than 'web address'.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
Compared to other apps that do file sharing, sharing snippets that can be viewed
in the browser is a unique distinction of bepasty.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Make fixtures more specific to avoid potential clashes with functional BDD
test fixtures of other apps.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
Tested to work alright after wsgi is restarted. Checked permissions on the
socket file /run/uwsgi/app/bepasty-freedombox/socket.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
Take user to the download page so that they can download the latest
version of the Windows client.
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
- Old URLs are still valid but are being redirected to newer URLs.
Tests:
- View the app pages. See the list of the clients and visit the URLs.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Add link to iOS app.
- Update the F-Droid/Android app IDs
Closes: #1918.
Tests:
- View the matrixsyanpse app page. See the list of the clients and visit the
URLs.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
Since radicale 1.x is only in Stretch (oldstable), remove code that
was added to support that version and migration from 1.x to newer
versions.
Keep the fix for missing log path as the fix is not available in Buster yet.
Tests:
- Ran functional tests in testing container. Manually tested logging
in to web interface and creating a calendar.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Add back the fix for missing log path]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
GPT scheme has two mostly identical partition table headers. One at the
beginning of the disk and one at the end. When an image is written to larger
disk, the second header is not at the end of the disk. Fix that by moving second
partition to end of the disk before attempting partition
Tests:
- Unit tests run as root work.
- On A64-OLinuXino board, boot with eMMC and UEFI image. The partition does not
expand on initial setup. Trying to manually expand in storage app fails. Apply
patch. Manual expansion works.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tested that on the Btrfs filesystem snapshot functional tests pass and
on the ext4 filesystem tests are skipped.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Hide some common partitions where users shouldn't create a share -
/.snapshots, /boot and /boot/firmware.
Tested that mount points 'boot' and '.snapshots' do not appear in the
list of shareable disks on Pioneer Freedombox.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
[sunil: Add /boot/efi to list of ignored mount points]
[sunil: Update test to check if mounts points are ignored]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
We have already progress quite far along in supporting backups and restore. This
is a critical functionality of FreedomBox.
Fixes: #1459.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Add a functional test that checks whether the SearX web application is
available. This can catch the case of an Internal Server Error thrown by
uWSGI server. See Debian bug https://bugs.debian.org/965095
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Run with new code. Setup is run for upgrades modules.
/etc/apt/preferences.d/51-freedombox-apps.pref contains the changes for
python3-attr.
- On stable. apt policy python3-attr shows version 19.3.0-3~bpo10+1 is the
preferred version.
- On stable, installing matrix-synapse leads to installation of python3-attr
=19.3.0-3~bpo10+1.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Call backports as 'Frequent Feature Updates'. This is make it easy for a
non-technical user to understand better what they are.
- Clearly recommend enabling backports as this is our current consensus.
- Explain that if backports are disabled, feature updates will come every 2
years or so.
- Show the status of backports on upgrades app even after it is enabled.
Disappearing options in the UI are generally confusing for users (hiding of
expand partition feature should be seen as exception rather than as example).
- Tone down the alarm on backports:
- Rename 'Security Notice' to 'Frequent Feature Updates' in security page.
- Remove 'on a best-effort basis' phrase, as everything in Debian is similar.
- Set the activate button to primary priority rather than warning to make the
user comfortable with it.
- Share translation strings across the two apps so that effort for translators
is reduced.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- On unstable and testing:
- Ran functional tests for upgrades.
- Ran actions "upgrades setup" and "upgrades setup-repositories".
- On testing:
- In develop mode, activated backports.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- 50freedombox4.pref handles freedombox package from current
backports. Whenever upgrading to a new Debian release, backports can
be activated for the new release, and will always include the
freedombox package at the start.
- 51freedombox-apps.pref handles apps, and each entry is particular to
a Debian release. For example, after bullseye release, entries from
bullseye-backports can be added, and entries from buster-backports
can be removed.
Tests:
- In testing container, run setup in development mode. Apt preferences
files have the expected content.
- In stable vagrant box, install deb with these changes. Apt
preferences files have the expected content.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- If backports is for older release, then it can be activated again to
upgrade to latest release. (Plan is to make this automatic, but
leave the manual option as a fallback.)
- Security notice still shown if older backports are enabled.
Tests:
- On Buster system, change distribution in
/etc/apt/sources.list.d/freedombox2.list to
stretch-backports. Updates page shows button to activate backports
again. Activate and check the source list to confirm that it has
buster-backports again.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Tests:
- Build deb and install in buster image. Manually remove backports
sources file. Security page does not show backports notice. Updates
page shows button to activate backports.
- Activate backports from updates page. Success message is shown and
button to activate backports is removed. Security page shows
backports notice.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
