- Since we are going to be an OpenID Provider, we need to fix the URLs that
other apps will be configured with for authentication. So change now from
/plinth to /freedombox. If done later, it will be harder since all the
configuration files for all dependent apps will need to be updated.
Tests:
- App availability checking works. Request goes to /freedombox URL
- Favicon is served properly and through /favicon.ico URL
- Redirection happens from / to /freedombox directly
- UI is available on /freedombox and on /plinth
- Manual page show /freedombox as the URL in two places
- Static files are successfully served from /freedombox URLs. URLs inside page
start with /freedombox
- backup, bepasty, calibre, config, dynamicdns, ejabberd, featherwiki, gitweb,
ikiwiki, kiwix, miniflux, names, openvpn, shadowsocks, shadowsocksserver,
sharing, shapshot, tiddlywiki, users, wireguard, jsxc, matrixsynapse, first
wizard, storage, samba, tags functional tests work. Backup/restore test for
matrixsynapse fails due to an unrelated bug (server not restarted after
restore).
- Setting the home page works:
- Having /plinth in the home page configuration works. Shows selection
correctly.
- Setting to app works. Shows selection correctly.
- Setting to user home page (sets /freedombox). Shows selection correctly.
- Setting to apache default works. Shows selection correctly.
- Changing back to FreedomBox service works. Shows selection correctly.
- Unit tests work
- Configuration page shows /freedombox in description but not /plinth
- Diagnostics show /freedombox in tests
- Roundcube URL link in email app has /freedombox
- email loads the page /.well-known/autoconfig/mail/config-v1.1.xml correctly
- email app shows /freedombox/apps/roundcube for /roundcube if roundcube is not
installed.
- networks: router configuration page shows URL starting with /freedombox.
- snapshot: Shows URL starting with /freedombox on the app page
- js licenses page uses /freedombox prefix for JSXC.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Config app description is as expected.
- Config form does not show domain name field anymore.
- Submitting the form with changes works.
- Names app has correct link for configuring static domain name. Clicking it
takes to page for setting domain name.
- On startup, static domian name signal is sent properly if set. Otherwise no
signal is send.
- Change domain name form shows correct value for current domain name.
- Change domain name form sets the value for domain name properly.
- Page title is correct.
- Validations works.
- Add/remove domain name signals are sent properly.
- Success message as shown expected
- /etc/hosts is updated as expected.
- Unit tests work.
- Functional tests on ejabberd, letsencrypt, matrix, email, jsxc, openvpn
- After freshly starting the service. Visiting names app shows correct list of
domains.
- ejabberd:
- Installs works as expected. Currently set domain_name is setup properly.
Copy certificate happens on proper domain.
- Changing the domain sets the domain properly in ejabberd configuration.
- Ejabberd app page shows link to name services instead of config app.
Clicking works as expected.
- letsencrypt:
- When no domains are configured, the link to 'Configure domains' is to the
names app.
- matrix-synapse:
- Domain name is properly shown in the status.
- email:
- Primary domain name is shows properly in the app page.
- Setting new primary domain works.
- When installing, domain set as static domain name is prioritized as primary
domain.
- jsxc:
- Show the current static domain name in the domain field. BOSH server is
available.
- openvpn:
- Show the current static domain in profile is set otherwise show the current
hostname.
- If domain name is not set, downloaded OpenVPN profile shows hostname.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Tests:
- Config app description is as expected.
- Config form does not show hostname anymore.
- Submitting the form with changes works.
- Names app has correct link for configuring Local Domain Name. Clicking it
takes to page for setting hostname.
- Avahi shows the current .local domain correctly in Names app.
- Change hostname form shows correct value for current hostname.
- Change hostname form sets the value for hostname properly.
- Page title is correct.
- Validations works.
- Pre/post hostname change signals are sent properly
- Success message as shown expected
- hostnamectl shows the set domain
- If domain name is not set, downloaded OpenVPN profile shows hostname.
- Unit tests work.
- Functional tests on names/config/avahi apps work.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- None disables logging altogether. This is useful when we want to prevent
FreedomBox from collecting IP addresses of visitors and other sensitive
information.
- Volatile logs are kept in RAM until the system is rebooted. Only 5% of RAM
will be used at most and only 2 days worth of logs are kept.
- Permanent will store logs into /var/log/journal. systemd-journald defaults
will apply. 10% of disk capacity is used at most, capped at 4GiB. Also logging
will stop if free space is below 15%. Maximum of 100 files are kept. No time
based cleanup is done.
Tests:
- Set the logging mode to disabled. Observe that `journalctl -f` does not show
any logs (say when performing plinth actions).
- Set the logging mode to volatile. Observe that `journalctl` shows that logging
is set to /run/log/journal/ and 5% of available memory is set as maximum.
- Set the logging mode to persistent. Observe that `journalctl` shows that
logging is set to /var/log/journal/ and 10% of disk space is set as maximum.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- ugettext functions will be removed in Django 4.0. Each use emits a warning
when running with Django 3.2. Since we have warnings enabled in developer mode,
we see quite a few messages because of this.
- ugettext is already a simple alias of gettext. So, no regressions are
expected.
Tests:
- Accessing an affected app in UI with Django 3.2 and Django 2.2 works fine.
- Using Django 3.2 there are no warnings related to removal of ugettext
functions.
- Ran regular unit tests.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Closes: #1981
Closes also most of threads in !1952.
Signed-off-by: Fioddor Superconcentrado <fioddor@gmail.com>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Helps: #1938.
backups/forms.py:
- ChoiceField labeled to allow translation.
- Translation applied to hard coded literals.
config/forms.py:
Lazy translation applied to literals that were translated but still
displayed in english to non-english users.
diagnostics_results.html:
Apply translation to results. Use gettext_noop to mark for translation.
dynamicdns/forms.py:
Apply translation to choice literals.
i2p/views.py:
Lazy translation applied to literals that were translated but still
displayed in english to non-english users.
names.html:
Apply translation to table headers.
performance/__init__.py:
Apply translation to description literals.
radicale/forms.py:
ChoiceField labeled to allow translation.
users/forms.py:
CharField labeled to allow translation.
QA:
- Literals visually verified.
- No errors in py.test-3.
- Yapf applied (only) to changed files.
- No remarks by flake8 to changed file.
Signed-off-by: Fioddor Superconcentrado <fioddor@gmail.com>
[sunil: Separate out the translations]
[sunil: Fix i18n for diagnostics]
[sunil: dynamicdns: Also do i18n for string GnuDIP]
[sunil: searx: Revert an incorrect removal of import]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Turn frontpage shortcut into an App component. Add tests and full
documentation.
- Overridden implementations for tahoe, diaspora, mediawiki shortcuts to handle
special cases. Special handling for ikiwiki.
- Extend App API for removing and retrieving a component.
- Add clients information into shortcuts to avoid hacks when presenting
shortcuts to Mobile devices via API.
- Fixed unnecessary stripping and adding of '/' when setting home page redirect
URLs. This fixes problem with setting Cockpit as home page.
- Replaced the use of term 'app' in favor of 'shortcut' as the term when setting
frontpage shortcuts as home page.
- JSXC shortcut does not require login.
- Don't show shadowsocks for anonymous users.
- Simplify showing selected shortcut details.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
