mirror of
https://github.com/freedombox/FreedomBox.git
synced 2026-01-28 08:03:36 +00:00
49 lines
1.9 KiB
Plaintext
49 lines
1.9 KiB
Plaintext
== Pine A64+ ==
|
|
|
|
{{attachment:pine64-plus.jpg|Pine 64+|width=640,height=579}}
|
|
|
|
[[https://www.pine64.org/devices/single-board-computers/pine-a64/|Pine A64+]] is an affordable single board computer with good performance.
|
|
|
|
'''Important:''' Read [[FreedomBox/Hardware|general advice]] about hardware before building a !FreedomBox with this single board computer.
|
|
|
|
=== Similar Hardware ===
|
|
|
|
* Both 1GB and 2GB versions of Pine A64+ are supported with the same !FreedomBox image.
|
|
* There is a separate [[https://freedombox.org/download/pine-a64-lts/|Pine A64-LTS image]].
|
|
|
|
=== Download ===
|
|
|
|
!FreedomBox SD card [[FreedomBox/Download|images]] for this hardware are available. Follow the instructions on the [[FreedomBox/Download|download]] page to create a !FreedomBox SD card and boot into !FreedomBox. Pick the image meant for Pine A64+.
|
|
|
|
An alternative to downloading these images is to [[InstallingDebianOn/Allwinner|install Debian]] on the device and then [[FreedomBox/Hardware/Debian|install FreedomBox]] on it.
|
|
|
|
=== Availability ===
|
|
|
|
* Price: 29 USD (for the 2 GB variant), 21 USD (for the 1 GB variant)
|
|
* [[https://www.pine64.org/?product=pine-a64-board-1gb|Pine A64+ with 1 GB RAM at Pine64 Store]]
|
|
* [[https://www.pine64.org/?product=pine-a64-board-2gb|Pine A64+ with 2 GB RAM at Pine64 Store]]
|
|
|
|
=== Hardware ===
|
|
|
|
* Open Source Hardware (OSHW): No
|
|
* CPU: Allwinner A64, Quad-core ARM Cortex A53 64-bit processor
|
|
* RAM: 3 variants - 512 MB (not recommended), 1 GB and 2 GB (recommended)
|
|
* Storage: SD card, eMMC (module sold separately but not tested with !FreedomBox)
|
|
* Architecture: arm64
|
|
* Ethernet: Gigabit Ethernet port
|
|
* Battery: Supports battery backup using a Li-Po battery
|
|
* !WiFi: None, use a [[FreedomBox/Hardware/USBWiFi|USB WiFi device]]
|
|
* SATA: None
|
|
|
|
=== Non-Free Status ===
|
|
|
|
* Non-free blobs required: No
|
|
* !WiFi: Not available
|
|
|
|
## END_INCLUDE
|
|
|
|
<<Include(FreedomBox/Portal)>>
|
|
|
|
----
|
|
CategoryFreedomBox
|