mirror of
https://github.com/freedombox/FreedomBox.git
synced 2026-01-21 07:55:00 +00:00
1b7349867e
Remove all .raw.wiki files and images (except icons). Then fetch the latest manual. Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
42 lines
1.8 KiB
Plaintext
42 lines
1.8 KiB
Plaintext
== Raspberry Pi 3 Model B+ ==
|
|
|
|
{{attachment:raspberrypi3bplus.jpg|Raspberry Pi 3 Model B+|width=640,height=418}}
|
|
|
|
[[https://www.raspberrypi.org/products/raspberry-pi-3-model-b-plus/|Raspberry Pi 3 Model B+]] is a popular single board computer developed with the intention of promoting teaching of basic computer science in schools. It is a successor to Raspberry Pi 3 Model B with better Ethernet and a 5Ghz Wi-Fi. !FreedomBox "stable" and "testing" images are available for Raspberry Pi 3 Model B+.
|
|
|
|
Please do not expect any output on a monitor connected via HDMI to this device as it does not display anything beyond the message 'Starting kernel...'. See the [[FreedomBox/Manual/QuickStart|Quick Start page]] to access and control your !FreedomBox from network.
|
|
|
|
'''Important:''' Read [[FreedomBox/Hardware|general advice]] about hardware before building a !FreedomBox with this single board computer.
|
|
|
|
=== Download ===
|
|
|
|
!FreedomBox SD card [[FreedomBox/Download|images]] for this hardware are available. Download the "stable" or "testing" image for Raspberry Pi 3 Model B+. Follow the instructions on the [[FreedomBox/Download|download]] page to create a !FreedomBox SD card and boot into !FreedomBox.
|
|
|
|
=== Availability ===
|
|
|
|
* Price: 35 USD
|
|
* [[https://www.raspberrypi.org/products/raspberry-pi-3-model-b-plus/|List of official distributors]]
|
|
|
|
=== Hardware ===
|
|
|
|
* Open Hardware: No
|
|
* CPU: 1.4GHz 64-bit quad-core ARMv8 CPU
|
|
* RAM: 1 GB
|
|
* Storage: MicroSD card slot
|
|
* Architecture: armhf
|
|
* Ethernet: 10/100/1000, RJ45
|
|
* !WiFi: 802.11ac but requires non-free firmware, instead use a [[FreedomBox/Hardware/USBWiFi|USB WiFi device]]
|
|
* SATA: None
|
|
|
|
=== Non-Free Status ===
|
|
|
|
* Non-free blobs required: boot firmware
|
|
* !WiFi: Requires non-free firmware
|
|
|
|
## END_INCLUDE
|
|
|
|
<<Include(FreedomBox/Portal)>>
|
|
|
|
----
|
|
CategoryFreedomBox
|