nik/davical
1
0
Fork 0
mirror of https://gitlab.com/davical-project/davical.git synced 2026-01-27 00:33:34 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
davical/config/example-config.php
Florian Schlichting b8df885484 put the most important debug options in a more visible place
2018-01-11 23:36:16 +01:00

724 lines
30 KiB
PHP
Raw Permalink Blame History

<?php
/***************************************************************************
* *
* These apply everywhere and will need setting *
* *
***************************************************************************/
/****************************
********* Mandatory *********
*****************************/
/**
* Database connection: DAViCal will attempt to connect to the database by
* successively applying connection parameters from the array in
* $c->pg_connect.
*/
$c->pg_connect[] = "dbname=davical user=davical_app";
// $c->pg_connect[] = "dbname=davical user=davical_app port=5433 host=somehost password=mypass";
/****************************
********* Desirable *********
*****************************/
/**
* "system_name" is used to specify the authentication realm of the server, as
* well as being used as a name to display in various places.
* Default: DAViCal CalDAV Server
*/
// $c->system_name = "DAViCal CalDAV Server";
/**
* The CalDAV specification does not define GET on a collection, but typically this is
* used as a .ics download for the whole collection. This will also enable a download
* link in the web interface for calendars with entries.
* Default: false
*/
// $c->get_includes_subcollections = true;
/**
* If "readonly_webdav_collections" is true, then calendars accessed via WebDAV
* will be read-only. Any changes to them must be applied via CalDAV.
*
* You may want to set this to false during your initial setup to make it
* easier for people to PUT whole calendars or addressbooks as part of migrating
* their data. After this, it is recommended to turn it off so that clients
* which have been misconfigured are readily identifiable.
* Default: true
*/
// $c->readonly_webdav_collections = false;
/**
* This will allow failure on import of collections to apply only to an
* individual event that is faulty, rather than failing the whole collection.
* Default: false (fail whole collection)
*/
// $c->skip_bad_event_on_import = true;
/***************************************************************************
* *
* ADMIN web Interface *
* *
***************************************************************************/
/**
* Address displayed on the login page to indicate who you should ask if you
* have problems logging on. Also for the "From" header of the email sent when
* a user has lost his password and clicks on the "Help! I've forgotten my
* password" on the login page.
*/
$c->admin_email ='calendar-admin@example.com';
/**
* Set this to 'true' in order to restrict the /setup.php page (which contains
* the entire phpinfo() output) to 'Administrator' users.
* Default: false
*/
// $c->restrict_setup_to_admin = true;
/**
* Restrict access to the administrative pages to only be available on a
* particular domain name and port. The default is that any DAViCal instance
* will have the administrative pages active. When any these settings is enabled,
* requests for administrative URLs such as index.php, admin.php, setup.php etc
* will be redirected to 'caldav.php', unless the restrictions are fulfilled.
*/
// $c->restrict_admin_domain = 'admin.davical.example.com';
// $c->restrict_admin_port = '8443';
/**
* The "enable_row_linking" option controls whether javascript is used
* to make the entire row clickable in browse lists in the administration
* pages. Since this doesn't work in Konqueror you may want to set this
* to false if you expect people to be using Konqueror with the DAViCal
* administration pages.
* Default=true
*/
// $c->enable_row_linking = false;
/**
* These should be an array of style sheets with a path specified relative
* to the root directory. Used for overriding display styles in the admin
* interface.
* e.g. : $c->local_styles = array('/css/my.css');
*/
// $c->local_styles = array();
// $c->print_styles = array();
/***************************************************************************
* *
* Debug Options *
* *
***************************************************************************/
/**
* Whenever you think you've found an issue with how DAViCal handles a situation,
* generating some data on what it's actually doing and whether it can find a
* certain event in the database etc. can be essential to allow others (or
* yourself) to understand what's going wrong.
*
* There are many different types of debug messages (for more details see
* debug-config.php), but this will log them all:
*/
// $c->dbg["ALL"] = 1;
/**
* While the above setting will quickly fill your PHP error log and should best
* be restricted to one or two requests, logging just the client interaction
* is almost as useful. This should be the minimum for any support request on
* the mailing list or issue tracker.
*/
// $c->dbg["request"] = 1; // The request headers & content
// $c->dbg['response'] = 1; // The response headers & content
/**
* Even on a moderately busy server, turning on debug logging for everyone can
* produce a lot of output in a short time that makes it hard to find the
* relevant lines. Debug filtering limits logging to certain IP addresses or
* usernames. (config values are arrays)
*/
// $c->dbg_filter["remoteIP"][] = '192.168.1.20';
// $c->dbg_filter["remoteIP"][] = '192.168.1.21';
// $c->dbg_filter["authenticatedUser"][] = 'peter';
// $c->dbg_filter["authenticatedUser"][] = 'john';
/***************************************************************************
* *
* Caldav Server *
* *
***************************************************************************/
/**
* The "collections_always_exist" value defines whether a MKCALENDAR
* command is needed to create a calendar collection before calendar
* resources can be stored in it. You will want to leave this to the
* default (true) if people will be using Evolution or Sunbird /
* Lightning against this because that software does not support the
* creation of calendar collections.
* Default: true
*/
// $c->collections_always_exist = false;
/**
* The name of a user's "home" calendar and addressbook. These will be created
* for each new user.
* Default: 'calendar' / 'addresses'
*/
// $c->home_calendar_name = 'calendar';
// $c->home_addressbook_name = 'addresses';
/**
* If the above options are not suitable for your new users, use this to create
* a more complex default collection management.
* Note: if you use this configuration option both $c->home_calendar_name and
* $c->home_addressbook_name are ignored!
* See https://wiki.davical.org/index.php/Configuration/settings/default_collections
*/
//$c->default_collections=array(
// array('type'=>'addressbook', 'name'=>'addresses', 'displayname'=>'%fn addressbook', 'privileges'=>null),
// array('type'=>'calendar', 'name'=>'calendar', 'displayname'=>'%fn calendar', 'privileges'=>null)
//);
/**
* An array of groups / permissions which should be automatically added
* for each new user created. This is a crude mechanism which we
* will hopefully manage to work out some better approach for in the
* future. For now, create an array that looks something like:
* array( 9 => 'R', 4 => 'A' )
* to create a 'read' relationship to user_no 9 and an 'all' relation
* with user_no 4.
* Default: none
*/
// $c->default_relationships = array();
/**
* An array of the privileges which will be configured for a user by default
* from the possible set of real privileges:
* 'read', 'write-properties', 'write-content', 'unlock', 'read-acl', 'read-current-user-privilege-set',
* 'bind', 'unbind', 'write-acl', 'read-free-busy',
* 'schedule-deliver-invite', 'schedule-deliver-reply', 'schedule-query-freebusy',
* 'schedule-send-invite', 'schedule-send-reply', 'schedule-send-freebusy'
*
* Or also from these aggregated privileges:
* 'write', 'schedule-deliver', 'schedule-send', 'all'
*/
// $c->default_privileges = array('read-free-busy', 'schedule-query-freebusy');
/**
* An array of fields on the usr record which should be set to specific
* values when the users are created.
* Default: none
*/
// $c->template_usr = array( 'active' => true,
// 'locale' => 'it_IT',
// 'date_format_type' => 'E',
// 'email_ok' => date('Y-m-d')
// );
/**
* If "hide_TODO" is true, then VTODO requested from someone other than the
* admin or owner of a calendar will not get an answer. Often these todo are
* only relevant to the owner, but in some shared calendar situations they
* might not be in which case you should set this to false.
* Default: true
*/
// $c->hide_TODO = false;
/**
* If true, then VALARM from someone other than the admin or owner of a
* calendar will not be included in the response. The default is false because
* the preferred behaviour is to enable/disable the alarms in your CalDAV
* client software.
*/
// $c->hide_alarm = true;
/**
* If you want to hide older events (in order to save resources, speed up
* clients, etc.) define the desired time interval in number of days.
*/
// $c->hide_older_than = 90;
/**
* Hide bound collections from certain clients
* If you want to use iOS (which does not support delegation) in combination
* with other software which does supports degation, you can use this option
* to tailor a working solution: bind all collections you want to see on iOS
* (emulation of delegation) and then hide these collections from other clients
* with real delegation support.
* Default: false/not set: always show bound collections
* If set to true: never show bound collections
* If set to an array: hide if any header => regex tuple matches
* Example: Hide bound collections from clients which send a User-Agent header
* matching regex1 OR an X-Client header matching regex2
*/
// $c->hide_bound = array( 'User-Agent'=>'#regex1#', 'X-Client'=>'#regex2#');
/**
* External subscription (BIND) minimum refresh interval
* Required if you want to enable remote binding ( webcal subscriptions )
* Default: none
*/
// $c->external_refresh = 60;
/**
* External subscription (BIND) user agent string
* Required if your remote calendar only delivers to known user agents.
* Default: none
*/
// $c->external_ua_string = '';
/**
* If you want to force DAViCal to use HTTP Digest Authentication for CalDAV
* access. Note that this requires all user passwords to be stored in plain text
* in the database. It is probably better to configure the webserver to do
* Digest auth against a separate user database (see below for Webserver Auth).
*/
// $c->http_auth_mode = "Digest";
/**
* Provide freebusy information to any (unauthenticated) user via the
* freebusy.php URL. Only events marked as PRIVATE will be excluded from the
* report.
* Default: false (authentication required)
*/
// $c->public_freebusy_url = true;
/**
* The "support_obsolete_free_busy_property" value controls whether,
* during a PROPFIND, the obsolete Scheduling property "calendar-free-busy-set"
* is returned. Set the value to true to support the property only if your
* client requires it, however note that PROPFIND performance may be
* adversely affected if you do so.
* Introduced in DAViCal version 1.1.4 in support of Issue #31 Database
* Performance Improvements.
* Default: false
*/
// $c->support_obsolete_free_busy_property = false;
/**
* The default locale will be "en_NZ";
* If you are in a non-English locale, you can set the default_locale
* configuration to one of the supported locales.
*
* Supported Locales (at present, see: "select * from supported_locales ;" for a full list)
*
* "de_DE", "en_NZ", "es_AR", "fr_FR", "nl_NL", "ru_RU"
*
* If you want locale support you probably know more about configuring it than me, but
* at this stage it should be noted that all translations are UTF-8, and pages are
* served as UTF-8, so you will need to ensure that the UTF-8 versions of these locales
* are supported on your system.
*
* People interested in providing new translations are directed to the Wiki:
* https://wiki.davical.org/w/Translating_DAViCal
*/
// $c->default_locale = "en_NZ";
/**
* Default will be $_SERVER['SERVER_NAME'];
* This is used to construct URLs which are passed in the answers to the client. You may
* want to force this to a specific domain in responses if your system is accessed by
* multiple names, otherwise you probably won't need to change it.
*/
// $c->domain_name = 'example.com';
/**
* If this option is set to true, then "@$c->domain_name" is appended to the
* user login name if it does not contain the @ character. If email addresses
* are used as user names in Davical, this fixes a problem with MacOS X 10.6
* Addressbook that cannot login to CardDav account.
* Default: false
*/
// $c->login_append_domain_if_missing = true;
/**
* Many people want this, but it may be a security issue for you, so it is
* disabled by default. If you enable it, then confidential / private events
* will be visible to the 'organizer' or 'attendee' lists. The reason that
* this becomes a security issue is that this identification needs to be based
* on the user's e-mail address. The user's e-mail address is generally
* something which they can set, so they could change it to be the address of
* an attendee of a meeting and then would be able to read the meeting.
*
* Without this, the only person who can view/change PRIVATE or CONFIDENTIAL
* events in a calendar is someone with full administrative rights to the calendar
* usually the owner.
*
* If the only person that devious is your sysadmin then you probably already
* enabled this option...
*/
// $c->allow_get_email_visibility = false;
/**
* Disable calendar-proxy-{read,write} on PROPFIND
* This can be useful if clients are known to not use this information,
* as it is very expensive to compute (especially on servers with lots of
* users who share their collections) and most clients will never use it,
* or ask for it explicitly using an expand-property REPORT, which is not
* affected by this option.
* Default: false/unset (always show)
* If set to true: never show
* If set to an array: hide if any header => regex tuple matches
*/
// $c->disable_caldav_proxy_propfind_collections = array( 'User-Agent'=>'#regex1#', 'X-Client'=>'#regex2#');
/**
* EXPERIMENTAL:
* If true, names of groups (prefixed with "@") given as an event attendee
* will get resolved to a list of members of that group. Note that CalDAV
* clients might get confused by this server behavior until they get
* synced again. Default: false.
*/
// $c->enable_attendee_group_resolution = true;
/***************************************************************************
* *
* Scheduling *
* *
***************************************************************************/
/**
* If you want to turn off scheduling functions you can set this to 'false' and
* DAViCal will not advertise the ability to schedule, leaving it to calendar
* clients to send out and receive scheduling requests.
* Default: true
*/
// $c->enable_auto_schedule = false;
/**
* If true, then remote scheduling will be enabled. There is a possibility
* of receiving spam events in calendars if enabled, you will at least know
* what domain the spam came from as domain key signatures are required for
* events to be accepted.
*
* You probably need to setup Domain Keys for your domain as well as the
* appropiate DNS SRV records.
*
* for example, if DAViCal is installed on cal.example.com you should have
* DNS SRV records like this:
* _ischedules._tcp.example.com. IN SRV 0 1 443 cal.example.com
* _ischedule._tcp.example.com. IN SRV 0 1 80 cal.example.com
*
* DNS TXT record for signing outbound requests
* example:
* cal._domainkey.example.com. 86400 IN TXT "k=rsa\; t=s\; p=PUBKEY"
* Default: false
*/
// $c->enable_scheduling = true;
/**
* Domain Key domain to use when signing outbound scheduling requests, this
* is the domain with the public key in a TXT record as shown above.
*
* TODO: enable domain/signing by per user keys, patches welcome.
* Default: none
*/
// $c->scheduling_dkim_domain = '';
/**
* Domain Key selector to use when signing outbound scheduling requests.
*
* TODO: enable selectors/signing by per user keys, patches welcome.
* Default: 'cal'
*/
// $c->scheduling_dkim_selector = 'cal';
/*
* Domain Key private key
* Required if you want to enable outbound remote server scheduling
* Default: none
*/
// $c->schedule_private_key = 'PRIVATE-KEY-BASE-64-DATA';
/***************************************************************************
* *
* Operation behind a Reverse Proxy *
* *
***************************************************************************/
/**
* If you install DAViCal behind a reverse proxy (e.g. an SSL offloader or
* application firewall, or in order to present services from different machines
* on a single public IP / hostname), the client IP, protocol and port used may
* be different from what the web server is reporting to DAViCal. Often, the
* original values are written to the X-Real-IP and/or X-Forwarded-For,
* X-Forwarded-Proto and X-Forwarded-Port headers. You can instruct DAViCal to
* attempt to "do the right thing" and use the content of these headers instead,
* when they are available.
* CAUTION: Malicious clients can spoof these headers. When you enable this, you
* need to make sure your reverse proxy erases any pre-existing values of all
* these headers, and that no untrusted requests can reach DAViCal without
* passing the proxy server.
* Default: false
*/
// $c->trust_x_forwarded = true;
/**
* Instead or in addition to the above, you can compute, override or unset the
* relevant variables. This is a catch-all for non-standard or advanced
* environments.
*/
/* Unset X-Real-IP, as it's not controlled by the reverse proxy. */
// unset( $_SERVER['HTTP_X_REAL_IP'] );
// $c->trust_x_forwarded = true;
/* Set all values manually. */
// $_SERVER['HTTPS'] = 'on';
// $_SERVER['SERVER_PORT'] = 443;
// $_SERVER['REMOTE_ADDR'] = $_SERVER['Client-IP'];
/***************************************************************************
* *
* External Authentication Sources *
* *
***************************************************************************/
/**
* Allow specifying another way to control access of the user by authenticating
* him against other drivers such has LDAP (the default is the PgSQL DB)
* $c->authenticate_hook['call'] should be set to the name of the plugin and must
* be a valid function that will be call like this:
* call_user_func( $c->authenticate_hook['call'], $username, $password )
*
* The login mechanism is used in 2 different places:
* - for the web interface in: index.php that calls DAViCalSession.php that extends
* Session.php (from AWL libraries)
* - for the caldav client in: caldav.php that calls HTTPAuthSession.php
* Both Session.php and HTTPAuthSession.php check against the
* authenticate_hook['call'], although for HTTPAuthSession.php this will be for
* each page. For Session.php this will only occur during login.
*
* $c->authenticate_hook['config'] should be set up with any configuration data
* needed by the authenticate call - see below or in the Wiki for details.
* If you want to develop your own authentication plugin, have a look at
* awl/inc/AuthPlugins.php or any of the inc/drivers_*.php files.
*
* $c->authenticate_hook['optional'] = true; can be set to try default authentication
* as well in case the configured hook should report a failure.
*/
// $c->authenticate_hook['optional'] = true;
/********************************/
/******* Other AWL hook *********/
/********************************/
// require_once('auth-functions.php');
// $c->authenticate_hook = array(
// 'call' => 'AuthExternalAwl',
// 'config' => array(
// // A PgSQL database connection string for the database containing user records
// 'connection' => 'dbname=wrms host=otherhost port=5433 user=general',
// // Which columns should be fetched from the database
// 'columns' => "user_no, active, email_ok, joined, last_update AS updated, last_used, username, password, fullname, email",
// // a WHERE clause to limit the records returned.
// 'where' => "active AND org_code=7"
// )
// );
/********************************/
/*********** LDAP hook **********/
/********************************/
/*
* For Active Directory go down to the next example.
*/
//$c->authenticate_hook['call'] = 'LDAP_check';
//$c->authenticate_hook['config'] = array(
// 'host' => 'www.tennaxia.net', //host name of your LDAP Server
// 'port' => '389', //port
/* For the initial bind to be anonymous leave bindDN and passDN
commented out */
// DN to bind to this server enabling to perform request
// 'bindDN'=> 'cn=manager,cn=internal,dc=tennaxia,dc=net',
// Password of the previous bindDN to bind to this server enabling to perform request
// 'passDN'=> 'xxxxxxxx',
// 'protocolVersion' => '3', //Version of LDAP protocol to use
// 'optReferrals' => 0, //whether to automatically follow referrals returned by the LDAP server
// 'networkTimeout' => 10, //timeout in seconds
// 'baseDNUsers'=> 'dc=tennaxia,dc=net', //where to look at valid user
// 'filterUsers' => 'objectClass=kolabInetOrgPerson', //filter which must validate a user according to RFC4515, i.e. surrounded by brackets
// 'baseDNGroups' => 'ou=divisions,dc=tennaxia,dc=net', //where to look for groups
// 'filterGroups' => 'objectClass=groupOfUniqueNames', //filter with same rules as filterUsers
/** /!\ "username" should be set and "modified" must be set **/
// 'mapping_field' => array("username" => "uid",
// "modified" => "modifyTimestamp",
// "fullname" => "cn" ,
// "email" =>"mail"
// ), //used to create the user based on his ldap properties
// 'group_mapping_field' => array("username" => "cn",
// "modified" => "modifyTimestamp",
// "fullname" => "cn" ,
// "members" =>"memberUid"
// ), //used to create the group based on the ldap properties
// 'group_member_dnfix' => true, // if your "members" field contains the full DN and needs to be truncated to just the uid
/** used to set default value for all users, will be overcharged by ldap if defined also in mapping_field **/
// 'default_value' => array("date_format_type" => "E","locale" => "fr_FR"),
/** foreach key set start and length in the string provided by ldap
example for openLDAP timestamp : 20070503162215Z **/
// 'format_updated'=> array('Y' => array(0,4),'m' => array(4,2),'d'=> array(6,2),'H' => array(8,2),'M'=>array(10,2),'S' => array(12,2)),
// 'startTLS' => 'yes', // Require that TLS is used for LDAP?
// If ldap_start_tls is not working, it is probably
// because php wants to validate the server's
// certificate. Try adding "TLS_REQCERT never" to the
// ldap configuration file that php uses (e.g. /etc/ldap.conf
// or /etc/ldap/ldap.conf). Of course, this lessens security!
// 'scope' => 'subtree', // Search scope to use, defaults to subtree.
// // Allowed values: base, onelevel, subtree.
//
// );
//
// /* If there is some user you do not want to sync from LDAP, put their username in this list */
// $c->do_not_sync_from_ldap = array( 'admin' => true );
//
//include('drivers_ldap.php');
/*
* Use the following LDAP example if you are using Active Directory
*
* You will need to change host, passDN and DOMAIN in bindDN
* and baseDNUsers.
*/
//$c->authenticate_hook['call'] = 'LDAP_check';
//$c->authenticate_hook['config'] = array(
// 'host' => 'ldap://ldap.example.net',
// 'bindDN' => 'auth@DOMAIN',
// 'passDN' => 'secret',
// 'baseDNUsers' => 'dc=DOMAIN,dc=local',
// 'protocolVersion' => 3,
// 'optReferrals' => 0,
// 'networkTimeout' => 10,
// 'filterUsers' => '(&(objectcategory=person)(objectclass=user)(givenname=*))',
// 'mapping_field' => array("username" => "uid",
// "fullname" => "cn" ,
// "email" => "mail"),
// 'default_value' => array("date_format_type" => "E","locale" => "en_NZ"),
// 'format_updated' => array('Y' => array(0,4),'m' => array(4,2),'d'=> array(6,2),'H' => array(8,2),'M'=>array(10,2),'S' => array(12,2))
// );
//
// /* If there is some user you do not want to sync from LDAP, put their username in this list */
// $c->do_not_sync_from_ldap = array( 'admin' => true );
//
//include('drivers_ldap.php');
/********************************/
/****** PAM and IMAP hooks ******/
/********************************/
/**
* Authentication against PAM using the Squid helper script.
*/
//$c->authenticate_hook = array(
// 'call' => 'SQUID_PAM_check',
// 'config' => array( 'script' => '/usr/bin/pam_auth', 'email_base' => 'example.com' )
// );
//include('drivers_squid_pam.php');
/**
* Authentication against PAM/system password database using pwauth.
*/
//$c->authenticate_hook = array('call' => 'PWAUTH_PAM_check',
// 'config' => array('path' => '/usr/sbin/pwauth',
// 'email_base' => 'example.com'));
//include('drivers_pwauth_pam.php');
/**
* Authentication against IMAP using the imap_open function.
*/
//$c->authenticate_hook['call'] = 'IMAP_PAM_check';
//$c->authenticate_hook['config'] = array(
// 'imap_url' => '{localhost:993/imap/ssl/novalidate-cert}',
// 'email_base' => 'example.com'
//);
//include('drivers_imap_pam.php');
/********************************/
/****** Webserver does Auth *****/
/********************************/
/**
* It is quite common that the webserver can do the authentication for you,
* and you just want DAViCal to trust the username that the webserver will pass
* through (in the REMOTE_USER or REDIRECT_REMOTE_USER environment variable).
* In that case, set server_auth_type (can be an array) to the value provided by
* the webserver in the AUTH_TYPE environment variable, as well as the two
* following options as needed.
*
* Note that this method does not pull account details from anywhere, so you
* will first need to create an account in DAViCal for each username that will
* authenticate in this way - it's just that the password on that account will
* be ignored and authentication will happen through the authentication method
* that the webserver is configured with.
*/
//$c->authenticate_hook['server_auth_type'] = 'Basic';
/**
* Uncomment this to use Webserver Auth for CalDAV access in addition to the
* Admin web pages.
*/
//include_once('AuthPlugins.php');
/**
* If your Webserver Auth method provides a logout URL (traditional Basic Auth
* does not), you can enter it here so the Logout link in the Admin web pages
* can point to it.
*/
//$c->authenticate_hook['logout'] = '/logout';
/***************************************************************************
* *
* Push Notification Server *
* *
***************************************************************************/
/*
* This enable XMPP PubSub push notifications to clients that request them.
* N.B. this will publish urls for ALL updates and does NOT restrict
* subscription permissions on the jabber server! That means anyone with
* read access to the pubsub tree of your jabber server can watch for updates,
* they will only see URL's to the updated entries not the calendar data.
*
* Only tested with ejabberd 2.0.x
*/
// $c->notifications_server = array( 'host' => $_SERVER['SERVER_NAME'], // jabber server hostname
// 'jid' => 'user@example.com', // user(JID) to login/ publish as
// 'password' => '', // password for above account
// // 'debug_jid' => 'otheruser@example.com' // send a copy of all publishes to this jid
// );
// include ( 'pubsub.php' );
/***************************************************************************
* *
* Detailed Metrics *
* *
***************************************************************************/
/*
* This enables a /metrics.php URL containing detailed metrics about the
* operation of DAViCal. Ideally you will be running memcache if you are
* interested in keeping metrics, but there is a simple metrics collection
* available to you without running memcache.
*
* Note that there is currently no way of enabling metrics via memcache
* without memcache being enabled for all of DAViCal.
*/
// $c->metrics_style = 'counters'; // Just the simple counter-based metrics
// $c->metrics_style = 'memcache'; // Only the metrics using memcache
// $c->metrics_style = 'both'; // Both styles of metrics
// $c->metrics_collectors = array('127.0.0.1'); // Restrict access to only this IP address
// $c->metrics_require_user = 'metricsuser'; // Restrict access to only connections authenticating as this user
Reference in New Issue View Git Blame Copy Permalink