mirror of
https://github.com/blakeblackshear/frigate.git
synced 2026-08-31 07:27:57 +00:00
194e9bef69
* pin genai review frames to the main stream * retain previews as long as either stream has recordings * watch sub stream recording health separately from main * reject record_sub on the same input as record and document the role * derive recording paths from the cache segment timestamp Recording paths carry one second of resolution, but since sub stream recording start times are resolved to fractional wall clock, anchored to the cache file mtime and chained to the previous segment's end. A stream cutting segments faster than once a second resolves consecutive segments into the same second, so two rows collide on the unique path index and the batch insert fails. The cache segment name is unique per camera stream and second by construction because ffmpeg names segments with strftime, so the recording path is now built from that timestamp while the row keeps the resolved start time. This also restores the path semantics from before sub stream recording, when start times came straight from the cache filename. Nothing derives times from recording paths: playback offsets, stream switching, and export all use the row's start time, which is unchanged, and the recordings sync matches files by exact path string. * keep the rest of a recording batch when one row conflicts * only publish record_sub status when a sub stream is configured * don't shadow camera_cfg when publishing empty cache streams * back off restarts when a recording stream goes stale * give the shared sub stream grace on any capture thread reset * include segment details in recording discard warnings
Frigate NVR™ - Realtime Object Detection for IP Cameras
[English] | 简体中文
A complete and local NVR designed for Home Assistant with AI object detection. Uses OpenCV and Tensorflow to perform realtime object detection locally for IP cameras.
Use of a GPU or AI accelerator is highly recommended. AI accelerators will outperform even the best CPUs with very little overhead. See Frigate's supported object detectors.
- Tight integration with Home Assistant via a custom component
- Designed to minimize resource use and maximize performance by only looking for objects when and where it is necessary
- Leverages multiprocessing heavily with an emphasis on realtime over processing every frame
- Uses a very low overhead motion detection to determine where to run object detection
- Object detection with TensorFlow runs in separate processes for maximum FPS
- Communicates over MQTT for easy integration into other systems
- Records video with retention settings based on detected objects
- 24/7 recording
- Re-streaming via RTSP to reduce the number of connections to your camera
- WebRTC & MSE support for low-latency live view
Documentation
View the documentation at https://docs.frigate.video
Donations
If you would like to make a donation to support development, please use Github Sponsors.
License
This project is licensed under the MIT License.
- Code: The source code, configuration files, and documentation in this repository are available under the MIT License. You are free to use, modify, and distribute the code as long as you include the original copyright notice.
- Trademarks: The "Frigate" name, the "Frigate NVR" brand, and the Frigate logo are trademarks of Frigate, Inc. and are not covered by the MIT License.
Please see our Trademark Policy for details on acceptable use of our brand assets.
Screenshots
Live dashboard
Streamlined review workflow
Multi-camera scrubbing
Built-in mask and zone editor
Translations
We use Weblate to support language translations. Contributions are always welcome.
Copyright © 2026 Frigate, Inc.