Tests:
- Run affected privileged actions through UI and notice that secret strings are
not logged.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This is so that the methods will be checked by mypy. This should help identify
any incorrect initialization of components.
- Remove unused self.repos in GitwebApp.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- mypy does not show any errors.
- Installing ejabberd app works. Privileged actions run fine.
- Unit tests work.
- No additional testing was done as type annotations don't have any effect at
runtime.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This will leave /etc/{plinth,freedombox} empty by default making service more
robust to run across various environments and situations. See systemd's
explanation for more details.
- Use Debian maintainer scripts remove all the existing files in
/etc/plinth/modules-enabled.
- Read from /usr/share/freedombox/modules-enabled then from
/etc/plinth/modules-enabled and finally from /etc/freedombox/modules-enabled.
Later read ones override previously read files. Any file pointing to /dev/null
will mean the module must be ignored.
Tests:
- Clean up /etc/plinth, /etc/freedombox and
/usr/share/freedombox/modules-enabled. Run service and notice that files are
getting loaded from development folder using a debug message.
- Run setup.py and notice that files get installed in
/usr/share/freedombox/modules-enabled/ and in the next run they get loaded from
there.
- Create a override file in /etc/plinth/modules-enabled/transmission and notice
that overriden file gets priority over the one in
/usr/share/freedombox/modules-enabled.
- Link the file /etc/plinth/modules-enabled/transmission to /dev/null and notice
that is not loaded.
- Create another file in /etc/freedombox/modules-enabled/transmission and notice
that it overrides the previous two files.
- All affected modules are loaded.
- Build a new Debian package and ensure that upgrading 23.8 to new version
removes are all configuration files.
- Build developer documentation and test that Tutorial -> Full Code and Tutorial
-> Skeleton sections have been updated with references to
-.../modules-enabled/... paths.
- Install quassel and notice that certificates were copied to /var/lib/quassel
directory. Change domain to another domain and notice that certificates were
copied again to that directory.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This improves modularity. Each app brings its own icons in its directory
instead of a centralized directory.
Tests:
- Install an app and notice that the installation notification has the icon.
- Visit an app's page in Apps and System (cockpit) section and ensure that the
app's icon is being shown.
- Visit the Apps and System section and notice that apps' icons are being shown.
- Visit the home page and notice that shortcuts' icons are being shown.
- Visit the URL /plinth/api/0/shortcuts and notice that the URLs for icons are
accessible and lead to proper icon files.
- Build developer documentation and notice that Tutorial -> View and Reference >
Menu pages show the expected updates.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
module.app property usage is greatly reduced because setup() and force_upgrade()
method are now part of App class instead of at the module level. Remove the
remaining minor cases of usage and drop the property altogether.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Primary purpose is to complete the App API and allow for multiple apps to be
present in a module without a single clashing setup() method. Secondary
objective is to get rid of SetupHelper instance simple use App instance instead.
- This brings us closer to not needing to implement setup() method for some of
the typical apps.
- Remove default value None for old_version parameter.
- A valid integer value is always passed to this call.
- The value of None is undefined.
- Simplifies the App API slightly.
- Drop setting 'pre', 'post' values to indicate the stage of setup for the App.
- Simplifies the setup methods significantly. Eliminates a class of
bugs (some of them seen earlier).
- The UI can show a simple 'installing...' or progress spinner instead of
individual stages.
- There are currently many inconsistencies where many operations are not
wrapped in helper.call() calls.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
This allows the root channel name to be preserved as expected.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Don't use command line argument for sending the join password for security.
- murmurd can switch to mumble-server UID before performing database operations.
Remove code to switch to mumble-server user.
- murmurd seems to return correct response code of 0 upon successfully setting
the password. Simplify code accordingly.
- Use subprocess.run() instead of subprocess.Popen for convenience.
Tests:
- Run functional and unit tests on Debian stable.
- Perform a fresh installation.
- Verify that setting super user password works.
- Verify that setting root channel names works.
- Verify that setting join password works.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
[james: Apply yapf formatting]
[james: Minor adjustment to help text]
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Show the current name of the root channel
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
[james: Use augeas for config file operations]
[james: Pass channel name on command line]
[james: Add functional test for change root channel name]
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Closes: #1797.
Tests:
- For each affected app, install the app, visit frontpage. Select the shortcut.
Notice that Learn More... link is shown and clicking on the link takes us to the
manual page of the app.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- For zoph, drop dependency on php7.4 as it will cause issues for future
versions of php. The dependency was a hack and not needed for Bullseye and
higher.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
[sunil: isort all files]
[sunil: Remove component in datetime component as managed_packages is empty]
[sunil: Minor refactor in minidlna for consistency]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- In Django 2.2 django.conf.urls.url() is an alias to django.urls.re_path().
- In Django 4.0, url() function will be removed. On Django 3.2, it throws a
warning that this function will be removed in future.
Tests:
- Run unit tests with Django 3.2 and Django 2.2.
- With Django 3.2 there are no warnings when running unit tests and when running
FreedomBox Service.
- Visit a few affected apps with both Django versions.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- ugettext functions will be removed in Django 4.0. Each use emits a warning
when running with Django 3.2. Since we have warnings enabled in developer mode,
we see quite a few messages because of this.
- ugettext is already a simple alias of gettext. So, no regressions are
expected.
Tests:
- Accessing an affected app in UI with Django 3.2 and Django 2.2 works fine.
- Using Django 3.2 there are no warnings related to removal of ugettext
functions.
- Ran regular unit tests.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Each app does not have to call the validator by itself.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Undo a minor isort refactor in searx]
[sunil: Change the menu label to 'Donate']
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Certificate can be setup for a single domain at a time in Mumble. So, allow the
user to choose the domain purely for this propose even though Mumble can work
with multiple domains. Tell Let's Encrypt to work with this domain.
Tests:
- Without Mumble installed, change the domain name. Notice the mumble related
certificate events are ignored.
- Install Mumble, a TLS domain is automatically selected. Certificate is setup
for that domain.
- Ensure at least two domains are setup in the system. See the list in the
Mumble app page. Choose a non-default domain. Domain should change and cert
should be setup for that domain.
- Go to config app and change the domain. Mumble domain should get set to a
different domain and cert should get updated.
- Install mumble without these changes. Apply the changes and start FreedomBox.
Mumble app should get upgraded and certificate should get setup for a domain.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Start showing port ranges properly.
- Fixes issue with Coturn TURN relay ports not being shown.
Closes: #1851.
Tests:
- Visit each of affected apps and see the port forwarding information. The
information is same as before.
- HTTP and HTTPS ports are not shown.
- Coturn app shows additional port ranges for TURN relay ports.
- Shadowsocks app does not show port forwarding information as it is internal
only.
- Visit one of the apps not effected by the patch. There is no section related
to port forwarding.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- Old URLs are still valid but are being redirected to newer URLs.
Tests:
- View the app pages. See the list of the clients and visit the URLs.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Add pytest hooks to ignore all functional tests if pytest_bdd is not
installed.
- Update pytest hooks to skip tests in file named 'test_functional.py' if
--include-functional argument is not provided.
- Move functional_tests/install.py into plinth/tests/functional and update
reference in Vagrantfile.
- Move scenario files into individual app folders. Rename them after the app
they are testing. Merge TODO items listed in todo.org into corresponding feature
files.
- Add test_functional.py in each app to build tests from the features file using
pytest_bdd.
- Move all step_definitions, support and data into plinth/tests/functional/.
Include all step_definitions from conftest.py. Update to relative imports
instead of absolute imports.
Tests performed:
- Run py.test-3 --collect-only shows all functional tests and lists 574 tests.
No errors show that name of feature files are correct. The number says that all
functional test features are included.
- Remove pytest_bdd (or modify the import name) and run py.test-3 --collect-only
skips collecting all functional tests and shows only 300+ tests.
- Run functional tests for a few apps with py.test-3 --include-functional -m
app. For storage, deluge.
- Run unit tests with py.test-3. Functional tests are listed by skipped.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
* `py.test-3 plinth/modules/mumble/manifest.py` said only two warnings
(could not create cache path {path})
* `sudo -u plinth /vagrant/run --develop` and https://localhost:4430/ had
show me what I expected
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Handle groups needed by an app.
- Handle reserved usernames for an app.
- Updated documentation
- Updated unit tests
Tests performed:
- Reserved usernames: ez-ipupd, ejabberd, Debian-minetest, mldonkey,
monkeysphere, mumble-server, privoxy, quasselcore, radicale, debian-tor,
debian-transmission
- Reserved usernames checks should work in the following forms:
- Create user
- Update user
- First boot user creation
- Full list of available groups should appear in following cases:
- Create user form
- Update user form
- Full list of groups should get created in Django DB during:
- Update user form display
- First boot form save
- When updating the last admin user, the 'admin' group choice is checked
and disabled.
- Following groups show up (sorted by group name):
- bit-torrent: Download files using BitTorrent applications
- git-access: Read-write access to Git repositories
- i2p: Manage I2P application
- wiki: View and edit wiki applications
- minidlna: Media streaming server
- ed2k: Download files using eDonkey applications
- freedombox-share: Access to the private shares
- web-search: Search the web
- syncthing: Administer Syncthing application
- feed-reader: Read and subscribe to news feeds
- admin: Access to all services and system settings
- Directory validation form checks for write permissions for following apps:
- deluge with debian-deluged user
- transmission with debian-transmission user
- Sharing app should show all the groups in add/edit share forms
- The following apps should get added to share group during setup:
debian-transmission
debian-deluged
- Unit tests pass
- Functional tests for users and groups pass
- Test that an app (example syncthing) provides the necessary
permissions to users in that group (but not in admin group).
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
[sunil: Fix i18n of group descriptions]
[sunil: Update developer documentation]
[sunil: Separate out cosmetic changes]
[sunil: Fix component ID for mumble]
[sunil: sharing: Remove unneeded dependency on users app]
[sunil: Implement better API for getting groups in component]
[sunil: Fix incorrect regression change ttrss app]
[sunil: Make iterating over gourps more readable]
[sunil: Improve tests, drop single use fixtures]
[sunil: Simplify test_view.py fixture]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Tested-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Introduce new API to mark an app that it can't be disabled.
- Mark jsxc, storage, config, upgrade and firewall apps as can't be disabled.
- Fixed functional tests
- Replaced AppForm with forms.Form in all modules' forms.py.
- Remove app.template.js.
- Remove unused styles.
- Remove app status checks in form_valid of Deluge, Diaspora, Matrix, Ejabberd,
MediaWiki, Storage, Transmission, Quassel
- Purge unused is_enabled context variables (Ikiwiki)
- ejabberd: Minor cleanup in template
- jsxc: Cleanup unneeded overrides
- tahoe: Cleanup unnecessary overrides
Tests performed:
- For all apps affected, test enable/disable button works and submitting
configuration form works: with changes updates message and without changes
'settings unchanged' message.
- avahi
- bind
- cockpit
- SKIP: coquelicot
- datetime
- deluge
- SKIP: diaspora
- ejabberd
- gitweb
- i2p
- infinoted
- ikiwiki
- matrixsynapse
- mediawiki
- minetest
- minidlna
- mldonkey
- mumble
- pagekite
- privoxy
- quassel
- radicale
- roundcube
- SKIP: samba
- searx
- SKIP: shaarli
- shadowsocks
- ssh
- tahoe
- transmission
- FAIL: tt-rss (not installable)
- wireguard
- Deluge test that configuration changes when app is disabled work
- Quassel test that setting the domain works when app is diabled
- Transmission test that setting the domain works when app is diabled
- Ikiwiki create form works properly
- Enable/disable button appears as expected when enabled and when disabled
- Enable/disable button works without Javascript
- Functional tests work for affected apps, Tor and OpenVPN
- AppForm is removed from developer documentation
- Forms reference
- Customizing tutorial
- Test all apps using directory select form
- Transmission
- Deluge
- Visit each template that overrides block configuration and ensure that it is
loaded properly and the display is as expected.
- All apps that use AppView that are not tested above should not have an
enable/disable button. That is JSXC, update, config, firewall, storage, users.
Signed-off-by: Alice Kile <buoyantair@protonmail.com>
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- Remove the need to pass all the individual information elements to the AppView
separately. This eliminates many issues with elements that were mistakenly not
sent to AppView. Also reduces a lot of code duplication.
- Create App classes for power and sso for consistency.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Reuse the app_id already available to the view.
- Implement automatically detecting if an app has implemented diagnostics.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- add and use "icon_filename" property to almost all of the modules
being displayed in the apps page
- sharing and tor modules do not seem to be using setup.html template
file and so the variable is not added to their __init__.py files,
therefore the icon will not be displayed on these app pages.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
