nik/liana
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

doc: slight improvement to Jade documentation

Browse Source
This commit is contained in:
Antoine Poinsot 2024-06-27 14:21:41 +02:00
parent 2bd25b6eaa
commit 15f4e81972
No known key found for this signature in database
GPG Key ID: E13FC145CD3F4304
1 changed files with 8 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
doc/signing_devices.md
View File

@ -40,11 +40,13 @@ Version 1.0.30 of the firmware is supported for use in P2WSH descriptors.
Support for use in Taproot descriptors is not yet available in the firmware.
After the setup of the device, the first connection to set the pin will set also the network.
The network cannot be change unless doing a factory reset.
WARNING: You won't be able to connect your Jade to Liana if you choose "QrCode" mode when setting up
your Jade. This is because in this mode the Jade refuses to communicate through USB.
If using "QrCode" mode, the device will refuse other communication channels like USB.
WARNING: the network cannot be changed after setting up the device without a factory reset. The
network is set at the same time as the PIN.
If using "Temporary Signer", the first connection through USB will setup the network, a new session
is required in order to change it. If using the Liana gui installer, is is advised to first choose
the network before connecting the Jade in "Temporary signer" mode.
It is sometimes useful to change the network without a factory reset, such as when testing the
device and/or Liana. In this case the "Temporary signer" mode may be used. The network can be reset
by simply disconnecting and reconnecting it. If using this mode, we advise you to first choose the
network in the Liana installer before setting up the network on your Jade.