mirror of
https://github.com/freedombox/FreedomBox.git
synced 2026-01-21 07:55:00 +00:00
doc: Fetch latest manual
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
This commit is contained in:
James Valleroy
parent
935f5680fb
commit
c5595f2d00
@ -2,7 +2,7 @@
|
||||
|
||||
{{attachment:apu1d.jpg|PC Engines APU 1D|width=632,height=319}}
|
||||
|
||||
[[http://www.pcengines.ch/apu1d.htm|PC Engines APU 1D]] is a single board computer with 3 Gigabit ethernet ports, a powerful AMD APU and Coreboot firmware. !FreedomBox images built for AMD64 machines are tested to work well for it.
|
||||
[[https://www.pcengines.ch/apu.htm|PC Engines APU]] boards are single board computers with 3 Gigabit ethernet ports, a powerful AMD64 APU and Coreboot firmware. !FreedomBox images built for AMD64 machines are tested to work well for [[http://www.pcengines.ch/apu1d.htm|APU1D]] and [[http://www.pcengines.ch/apu3b2.htm|APU3B ]] models and are expected to work also well on the other, very similar versions.
|
||||
|
||||
'''Important:''' Read [[FreedomBox/Hardware|general advice]] about hardware before building a !FreedomBox with this single board computer.
|
||||
|
||||
@ -21,21 +21,26 @@ Although untested, the following similar hardware is also likely to work well wi
|
||||
* [[http://www.pcengines.ch/apu2c4.htm|apu2c4]]
|
||||
* [[http://www.pcengines.ch/apu3a2.htm|apu3a2]]
|
||||
* [[http://www.pcengines.ch/apu3a4.htm|apu3a4]]
|
||||
* [[http://www.pcengines.ch/apu3b2.htm|apu3b2]]
|
||||
* [[http://www.pcengines.ch/apu3b4.htm|apu3b4]]
|
||||
|
||||
=== Download ===
|
||||
=== Installation ===
|
||||
|
||||
!FreedomBox disk [[FreedomBox/Download|images]] for this hardware are available. Follow the instructions on the [[FreedomBox/Download|download]] page to create a !FreedomBox SD card, USB disk, SSD or hard drive and boot into !FreedomBox. Pick the image meant for all amd64 machines.
|
||||
|
||||
An alternative to downloading these images is to [[InstallingDebianOn/Alix3d2|install Debian]] on the APU and then [[FreedomBox/Hardware/Debian|install FreedomBox]] on it.
|
||||
|
||||
An [[https://github.com/huubsch/APU-Installation-HomeAssistant-Freedombox|installation manual]] tested on the APU3B is available on GitHub, including flashing with UEFI-BIOS
|
||||
|
||||
=== Networking ===
|
||||
|
||||
The first network port, the left most one in the above picture, is configured by !FreedomBox to be an upstream Internet link and the remaining 2 ports are configured for local computers to connect to.
|
||||
|
||||
=== Availability ===
|
||||
|
||||
PCEngines announced the [[https://www.pcengines.ch/eol.htm|phase-out]] of these boards in June 2023.
|
||||
|
||||
In 2024 [[https://pcengines.github.io/|Dasharo announced the support of APU-boards]] : coreboot + SeaBIOS and coreboot+UEFI.
|
||||
|
||||
* Price: 110 - 170 USD (depending on the board and supplier)
|
||||
* [[http://www.pcengines.ch/order.htm|PC Engines]]
|
||||
* [[http://www.pcengines.ch/order.htm|Full list of suppliers]]
|
||||
@ -43,18 +48,17 @@ The first network port, the left most one in the above picture, is configured by
|
||||
=== Hardware ===
|
||||
|
||||
* Open Hardware: No
|
||||
* CPU: [[http://www.amd.com/en-gb/products/embedded/processors/g-series|AMD G series T40E]]
|
||||
* RAM: 2 GB DDR3-1066 DRAM
|
||||
* Storage: SD card, External USB
|
||||
* CPU: [[http://www.amd.com/en-gb/products/embedded/processors/g-series|AMD G series T40E]]; [[https://teklager.se/en/amd-gx-412tc-cpu-specification/|GX-412TC]], 1 GHz quad core (depending on model)
|
||||
* RAM: 2 GB DDR3-1066 DRAM - 4 GB (depending on model)
|
||||
* Storage: SD card, External USB, mSATA module
|
||||
* Architecture: amd64
|
||||
* Ethernet: 3 Gigabit Ethernet ports
|
||||
* !WiFi: None, use a [[FreedomBox/Hardware/USBWiFi|USB WiFi device]]
|
||||
* SATA: 1 m-SATA and 1 SATA
|
||||
* WiFi: wle200nx / wle600vx / wle900vx miniPCI express wireless modules
|
||||
* SATA: 1 mSATA-module and 1 SATA
|
||||
|
||||
=== Non-Free Status ===
|
||||
|
||||
* Non-free blobs required: No
|
||||
* !WiFi: Not available
|
||||
* Boot firmware: [[http://www.pcengines.ch/apu1d.htm|Coreboot]]
|
||||
|
||||
## END_INCLUDE
|
||||
@ -62,4 +66,4 @@ The first network port, the left most one in the above picture, is configured by
|
||||
<<Include(FreedomBox/Portal)>>
|
||||
|
||||
----
|
||||
CategoryFreedomBox
|
||||
CategoryFreedomBox CategoryFreedomBox
|
||||
|
||||
@ -8,6 +8,32 @@ For more technical details, see the [[https://salsa.debian.org/freedombox-team/f
|
||||
|
||||
The following are the release notes for each !FreedomBox version.
|
||||
|
||||
== FreedomBox 26.2 (2026-01-20) ==
|
||||
|
||||
* gitweb: Fix deleting last repo disables app
|
||||
* locale: Update translations for Estonian, Italian
|
||||
* notifications: Close dropdown when clicking outside
|
||||
|
||||
== FreedomBox 26.1 (2026-01-05) ==
|
||||
|
||||
* container: Add aliases for start/stop commands
|
||||
* locale: Update translations for Albanian, Bulgarian, Chinese (Simplified Han script), Czech, Estonian, French, German, Italian, Russian, Turkish, Ukrainian
|
||||
|
||||
== FreedomBox 25.17.1 (2025-12-15) ==
|
||||
|
||||
=== Highlights ===
|
||||
|
||||
* backups: Set proper permissions for backups-data directory
|
||||
* minetest: Rename Minetest to Luanti
|
||||
|
||||
=== Other Changes ===
|
||||
|
||||
* locale: Update translations for Albanian, Bulgarian, Czech, Estonian, Hindi, Italian, Russian, Turkish, Ukrainian
|
||||
* minetest: Remove legacy code, use new name, conf, etc.
|
||||
* transmission: Deal with changes in latest forky package
|
||||
* transmission: Remove obsolete apache redirects
|
||||
* vagrant: Enable EFI firmware
|
||||
|
||||
== FreedomBox 25.17 (2025-12-08) ==
|
||||
|
||||
=== Highlights ===
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
|
||||
{{attachment:apu1d.jpg|PC Engines APU 1D|width=632,height=319}}
|
||||
|
||||
[[http://www.pcengines.ch/apu1d.htm|PC Engines APU 1D]] is a single board computer with 3 Gigabit ethernet ports, a powerful AMD APU and Coreboot firmware. !FreedomBox images built for AMD64 machines are tested to work well for it.
|
||||
[[https://www.pcengines.ch/apu.htm|PC Engines APU]] boards are single board computers with 3 Gigabit ethernet ports, a powerful AMD64 APU and Coreboot firmware. !FreedomBox images built for AMD64 machines are tested to work well for [[http://www.pcengines.ch/apu1d.htm|APU1D]] and [[http://www.pcengines.ch/apu3b2.htm|APU3B ]] models and are expected to work also well on the other, very similar versions.
|
||||
|
||||
'''Important:''' Read [[FreedomBox/Hardware|general advice]] about hardware before building a !FreedomBox with this single board computer.
|
||||
|
||||
@ -21,21 +21,26 @@ Although untested, the following similar hardware is also likely to work well wi
|
||||
* [[http://www.pcengines.ch/apu2c4.htm|apu2c4]]
|
||||
* [[http://www.pcengines.ch/apu3a2.htm|apu3a2]]
|
||||
* [[http://www.pcengines.ch/apu3a4.htm|apu3a4]]
|
||||
* [[http://www.pcengines.ch/apu3b2.htm|apu3b2]]
|
||||
* [[http://www.pcengines.ch/apu3b4.htm|apu3b4]]
|
||||
|
||||
=== Download ===
|
||||
=== Installation ===
|
||||
|
||||
!FreedomBox disk [[FreedomBox/Download|images]] for this hardware are available. Follow the instructions on the [[FreedomBox/Download|download]] page to create a !FreedomBox SD card, USB disk, SSD or hard drive and boot into !FreedomBox. Pick the image meant for all amd64 machines.
|
||||
|
||||
An alternative to downloading these images is to [[InstallingDebianOn/Alix3d2|install Debian]] on the APU and then [[FreedomBox/Hardware/Debian|install FreedomBox]] on it.
|
||||
|
||||
An [[https://github.com/huubsch/APU-Installation-HomeAssistant-Freedombox|installation manual]] tested on the APU3B is available on GitHub, including flashing with UEFI-BIOS
|
||||
|
||||
=== Networking ===
|
||||
|
||||
The first network port, the left most one in the above picture, is configured by !FreedomBox to be an upstream Internet link and the remaining 2 ports are configured for local computers to connect to.
|
||||
|
||||
=== Availability ===
|
||||
|
||||
PCEngines announced the [[https://www.pcengines.ch/eol.htm|phase-out]] of these boards in June 2023.
|
||||
|
||||
In 2024 [[https://pcengines.github.io/|Dasharo announced the support of APU-boards]] : coreboot + SeaBIOS and coreboot+UEFI.
|
||||
|
||||
* Price: 110 - 170 USD (depending on the board and supplier)
|
||||
* [[http://www.pcengines.ch/order.htm|PC Engines]]
|
||||
* [[http://www.pcengines.ch/order.htm|Full list of suppliers]]
|
||||
@ -43,18 +48,17 @@ The first network port, the left most one in the above picture, is configured by
|
||||
=== Hardware ===
|
||||
|
||||
* Open Hardware: No
|
||||
* CPU: [[http://www.amd.com/en-gb/products/embedded/processors/g-series|AMD G series T40E]]
|
||||
* RAM: 2 GB DDR3-1066 DRAM
|
||||
* Storage: SD card, External USB
|
||||
* CPU: [[http://www.amd.com/en-gb/products/embedded/processors/g-series|AMD G series T40E]]; [[https://teklager.se/en/amd-gx-412tc-cpu-specification/|GX-412TC]], 1 GHz quad core (depending on model)
|
||||
* RAM: 2 GB DDR3-1066 DRAM - 4 GB (depending on model)
|
||||
* Storage: SD card, External USB, mSATA module
|
||||
* Architecture: amd64
|
||||
* Ethernet: 3 Gigabit Ethernet ports
|
||||
* !WiFi: None, use a [[FreedomBox/Hardware/USBWiFi|USB WiFi device]]
|
||||
* SATA: 1 m-SATA and 1 SATA
|
||||
* WiFi: wle200nx / wle600vx / wle900vx miniPCI express wireless modules
|
||||
* SATA: 1 mSATA-module and 1 SATA
|
||||
|
||||
=== Non-Free Status ===
|
||||
|
||||
* Non-free blobs required: No
|
||||
* !WiFi: Not available
|
||||
* Boot firmware: [[http://www.pcengines.ch/apu1d.htm|Coreboot]]
|
||||
|
||||
## END_INCLUDE
|
||||
@ -62,4 +66,4 @@ The first network port, the left most one in the above picture, is configured by
|
||||
<<Include(FreedomBox/Portal)>>
|
||||
|
||||
----
|
||||
CategoryFreedomBox
|
||||
CategoryFreedomBox CategoryFreedomBox
|
||||
|
||||
@ -20,7 +20,7 @@ La app Home Assistant se considera experimental en !FreedomBox, ya que es nueva
|
||||
|
||||
=== Hardware ===
|
||||
|
||||
Home Assistant puede detectar, configurar, y usar varios dispositivos de la red local. Por ejemplo, si un dispositivo se conecta mediante Wi-Fi o LAN a la misma red que !FreedomBox, Home Assistant puede detectarlo, configurarlo, y usarlo. También se soportan otros protocolos de automatización como Thread, !ZigBee, y Z-Wave, pero requieren hardware adicional para conectarlos a tu !FreedomBox. Por ejemplo, si tienes un sensor de puerta que habla !ZigBee, necesitas conectar un adaptador !ZigBee USB a tu !FreedomBox. Home Assistant podrá entonces detectar y usar el sensor de puerta en la red de !ZigBee.
|
||||
Home Assistant puede detectar, configurar, y usar varios dispositivos de la red local. Por ejemplo, si un dispositivo se conecta mediante Wi-Fi o LAN a la misma red que !FreedomBox, Home Assistant puede detectarlo, configurarlo, y usarlo. También se soportan otros protocolos de automatización como Thread, !ZigBee, y Z-Wave, pero requieren hardware adicional para conectarlos a tu !FreedomBox. Por ejemplo, si tienes un sensor de puerta que habla !ZigBee, necesitas conectar un adaptador !ZigBee USB a tu !FreedomBox. Home Assistant podrá entonces detectar y usar el sensor de puerta en la red de !ZigBee. '''Nota:''' Si conectas hardware como este a tu FreedomBox después de instalar la aplicación Home Assistant tendrás que deshabilitarla y volverla a habilitar para que lo detecte y lo use.
|
||||
|
||||
Home Assistant es una solución completa si tu automatización del hogar necesita soportar miles de dispositivos. Puedes consultar si Home Assistant soporta un dispositivo visitando su página de [[https://www.home-assistant.io/integrations/|integraciones]]. Otros dispositivos similares a los soportados podrían estarlo aunque no figuren en la lista. Se recomienda comprar hardware etiquetado como compatible con Home Assistant.
|
||||
|
||||
|
||||
@ -8,6 +8,32 @@ For more technical details, see the [[https://salsa.debian.org/freedombox-team/f
|
||||
|
||||
The following are the release notes for each !FreedomBox version.
|
||||
|
||||
== FreedomBox 26.2 (2026-01-20) ==
|
||||
|
||||
* gitweb: Fix deleting last repo disables app
|
||||
* locale: Update translations for Estonian, Italian
|
||||
* notifications: Close dropdown when clicking outside
|
||||
|
||||
== FreedomBox 26.1 (2026-01-05) ==
|
||||
|
||||
* container: Add aliases for start/stop commands
|
||||
* locale: Update translations for Albanian, Bulgarian, Chinese (Simplified Han script), Czech, Estonian, French, German, Italian, Russian, Turkish, Ukrainian
|
||||
|
||||
== FreedomBox 25.17.1 (2025-12-15) ==
|
||||
|
||||
=== Highlights ===
|
||||
|
||||
* backups: Set proper permissions for backups-data directory
|
||||
* minetest: Rename Minetest to Luanti
|
||||
|
||||
=== Other Changes ===
|
||||
|
||||
* locale: Update translations for Albanian, Bulgarian, Czech, Estonian, Hindi, Italian, Russian, Turkish, Ukrainian
|
||||
* minetest: Remove legacy code, use new name, conf, etc.
|
||||
* transmission: Deal with changes in latest forky package
|
||||
* transmission: Remove obsolete apache redirects
|
||||
* vagrant: Enable EFI firmware
|
||||
|
||||
== FreedomBox 25.17 (2025-12-08) ==
|
||||
|
||||
=== Highlights ===
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user