NetBIOS was used with now deprecated SMB1 protocol.
Tests performed:
- Windows 10 can access shares when the nmbd service is disabled.
- In stable and testing containers, all the samba module tests pass.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Also:
- Remove addressses [fc00::]/7 and [fe80::] from `allow hosts`, as
those had no effect as described in #2334.
- Remove unknown parameter `access control = yes` from Samba
configuration.
Tests performed in a stable container:
- After Samba app upgrade was performed, enabled Samba Home share.
- Using the `testparm` command, checked that the share is accessible
from ::1 IPv6 address:
```
> sudo testparm -s /etc/samba/smb-freedombox.conf host-ip ::1
Allow connection from host-ip (::1) to disk_home
> sudo testparm -s /etc/samba/smb-freedombox.conf host-ip ::2
Denied connection from host-ip (::2)
Deny connection from host-ip (::2) to disk_home
```
- Checked that when `ping localhost` returns ::1 in the container,
all the Samba tests pass.
Closes#2334.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Fixes error 500 when trying to open Samba app page when at least
one of the users in freedombox-share group doesn't exist.
Tests performed in both stable and testing containers:
- Installed Samba app.
- Installed Deluge app (Plinth install/setup fails but the Debian
package itself was installed).
- Did `apt remove --purge deluged` from command line.
- Checked that the debian-deluged user doesn't exist (`getent passwd`)
and the user is in the freedombox-share group (`getent group`).
- Checked that the Samba app page opens without errors.
- Checked that all the Samba tests pass.
Fixes#2411.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- This is so that the methods will be checked by mypy. This should help identify
any incorrect initialization of components.
- Remove unused self.repos in GitwebApp.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Uninstall samba. Notice that /etc/default/samba and
/etc/samba/smb-freedombox.conf are removed.
- Reinstall samba and notice that the two files are restored to their expected
content.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This will leave /etc/{plinth,freedombox} empty by default making service more
robust to run across various environments and situations. See systemd's
explanation for more details.
- Use Debian maintainer scripts remove all the existing files in
/etc/plinth/modules-enabled.
- Read from /usr/share/freedombox/modules-enabled then from
/etc/plinth/modules-enabled and finally from /etc/freedombox/modules-enabled.
Later read ones override previously read files. Any file pointing to /dev/null
will mean the module must be ignored.
Tests:
- Clean up /etc/plinth, /etc/freedombox and
/usr/share/freedombox/modules-enabled. Run service and notice that files are
getting loaded from development folder using a debug message.
- Run setup.py and notice that files get installed in
/usr/share/freedombox/modules-enabled/ and in the next run they get loaded from
there.
- Create a override file in /etc/plinth/modules-enabled/transmission and notice
that overriden file gets priority over the one in
/usr/share/freedombox/modules-enabled.
- Link the file /etc/plinth/modules-enabled/transmission to /dev/null and notice
that is not loaded.
- Create another file in /etc/freedombox/modules-enabled/transmission and notice
that it overrides the previous two files.
- All affected modules are loaded.
- Build a new Debian package and ensure that upgrading 23.8 to new version
removes are all configuration files.
- Build developer documentation and test that Tutorial -> Full Code and Tutorial
-> Skeleton sections have been updated with references to
-.../modules-enabled/... paths.
- Install quassel and notice that certificates were copied to /var/lib/quassel
directory. Change domain to another domain and notice that certificates were
copied again to that directory.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This improves modularity. Each app brings its own icons in its directory
instead of a centralized directory.
Tests:
- Install an app and notice that the installation notification has the icon.
- Visit an app's page in Apps and System (cockpit) section and ensure that the
app's icon is being shown.
- Visit the Apps and System section and notice that apps' icons are being shown.
- Visit the home page and notice that shortcuts' icons are being shown.
- Visit the URL /plinth/api/0/shortcuts and notice that the URLs for icons are
accessible and lead to proper icon files.
- Build developer documentation and notice that Tutorial -> View and Reference >
Menu pages show the expected updates.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Drop all Samba shares when app is uninstalled
Test:
1. Install app, enable Open Share and Group Share
2. Reinstall app and confirm all shares get dropped
Signed-off-by: nbenedek <contact@nbenedek.me>
[sunil: Update docstrings]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
The reason for this patch is explained in issue #789 .
See also: !2250
Signed-off-by: nbenedek <contact@nbenedek.me>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
[jvalleroy: Don't enable app when upgrading]
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Closes: #2309.
- This prevents processing of AppView when the app is being uninstalled. For at
least two apps, this has failed because the AppView assumes that app and its
dependencies are installed.
- Use a dedicated template as well is simplify app template.
Tests:
- Installing and uninstalling an app works.
- Refreshing the app page during uninstall does not lead to an error for samba
and email apps.
- Unit tests pass.
- Functional tests for samba and email work.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests work (uninstall fails)
- Initial setup works
- File /etc/default/samba is updated
- Dump and restore share during backup/restore works
- Setup run successfully during restore
- /var/lib/plinth/backups-data/samba-shares-dump.conf
- Adding/deleting a share works
- Not tested: Add a share on ntfs or vfat file system works
- Showing list of shares in app view works
- Getting list of samba users in app view works
- Handling errors during add/delete share works
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
In a testing container, checked that the mount point /run/host/os-release
is not listed on the Samba app page.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
module.app property usage is greatly reduced because setup() and force_upgrade()
method are now part of App class instead of at the module level. Remove the
remaining minor cases of usage and drop the property altogether.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Primary purpose is to complete the App API and allow for multiple apps to be
present in a module without a single clashing setup() method. Secondary
objective is to get rid of SetupHelper instance simple use App instance instead.
- This brings us closer to not needing to implement setup() method for some of
the typical apps.
- Remove default value None for old_version parameter.
- A valid integer value is always passed to this call.
- The value of None is undefined.
- Simplifies the App API slightly.
- Drop setting 'pre', 'post' values to indicate the stage of setup for the App.
- Simplifies the setup methods significantly. Eliminates a class of
bugs (some of them seen earlier).
- The UI can show a simple 'installing...' or progress spinner instead of
individual stages.
- There are currently many inconsistencies where many operations are not
wrapped in helper.call() calls.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Closes: #1797.
Tests:
- For each affected app, install the app, visit frontpage. Select the shortcut.
Notice that Learn More... link is shown and clicking on the link takes us to the
manual page of the app.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Implemented within the backup component. Scope for implementing database
backup/restore in similar way.
- Add new 'settings' key in the backup manifest to allow keys to backed up and
restored.
- Implement by dumping/loading settings from DB into the file.
Tests:
- Unit tests.
- Backup/restore tests for dynamicdns workss.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- For zoph, drop dependency on php7.4 as it will cause issues for future
versions of php. The dependency was a hack and not needed for Bullseye and
higher.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
[sunil: isort all files]
[sunil: Remove component in datetime component as managed_packages is empty]
[sunil: Minor refactor in minidlna for consistency]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- In Django 2.2 django.conf.urls.url() is an alias to django.urls.re_path().
- In Django 4.0, url() function will be removed. On Django 3.2, it throws a
warning that this function will be removed in future.
Tests:
- Run unit tests with Django 3.2 and Django 2.2.
- With Django 3.2 there are no warnings when running unit tests and when running
FreedomBox Service.
- Visit a few affected apps with both Django versions.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Done automatically by running isort . in top level directory.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- ugettext functions will be removed in Django 4.0. Each use emits a warning
when running with Django 3.2. Since we have warnings enabled in developer mode,
we see quite a few messages because of this.
- ugettext is already a simple alias of gettext. So, no regressions are
expected.
Tests:
- Accessing an affected app in UI with Django 3.2 and Django 2.2 works fine.
- Using Django 3.2 there are no warnings related to removal of ugettext
functions.
- Ran regular unit tests.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Also, fix an issue where share writability tests were performed always as an admin user.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Each app does not have to call the validator by itself.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- attr() CSS function can't used practically on anything but the content
property.
- Introduce a hack for setting any arbitrary percentage width on an element
similar to w-25, w-50, w-75 and w-100 bootstrap utilities. This hack should not
be used widely.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- When the base font size is changed, all the measure will scale appropriately.
- Bootstrap 4 has done the same.
- Keep using px for responsive lengths and some border widths that need not
scale.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Rows in bootstrap 4 tables are taller by default. This is better suited for
mobile layouts and look prettier on desktops too. Adopting this approach instead
of condensed tables eliminates the need for striping, bordering and narrower
tables.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Closes: #1818. The new navbar collapse handles items better without a scrollbar.
- Switch dependency to newer bootstrap4 library.
- Bootstrap 4 has 5 grid levels instead of 4. Adjust all classes accordingly to
retain current semantics.
- Update for newer markup for dropdowns.
- Replace use for labels with badges. Labels have been removed. Use
badge-secondary instead of label-default.
- Replace use of btn-xs with btn-sm. Size is roughly the same.
- Accommodate removal of form-horizontal.
- .hidden* and .visible* classes have been removed. Use alternate utilities.
- Replace use of table-condensed with table-sm.
- Update progress bar background styling. .progress-bar-* have been replaced
with bg-*.
- Drop support for IE9 and below. Bootstrap 4 does not support those browsers.
- Use the new simplified markup for navs, navbar and navbar-toggler. Accommodate
removal of .navbar-fixed-top.
- Update the JSXC page too.
- Update all values that are using rem units. The base font size is now 1rem =
16px instead of 1rem = 10px. This the default for bootstrap 4.
- A button inside a dropdown menu is natively supported by bootstrap 4. Remove
custom styling done earlier.
- Drop use of removed class thumbnail.
- Override colors for buttons and warnings to keep the old style.
- Use new markup for close buttons inside alerts.
- Use .collapse.show instead of .collapse.in as per bootstrap 4 styling.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Closes#1989
I checked that all Samba tests pass.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
[sunil: Minor indentation and styling fixes in template]
[sunil: Prevent multiple HTML attributes with same name in case of vfat]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Undo a minor isort refactor in searx]
[sunil: Change the menu label to 'Donate']
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Hide some common partitions where users shouldn't create a share -
/.snapshots, /boot and /boot/firmware.
Tested that mount points 'boot' and '.snapshots' do not appear in the
list of shareable disks on Pioneer Freedombox.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
[sunil: Add /boot/efi to list of ignored mount points]
[sunil: Update test to check if mounts points are ignored]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Rename get_disks() to get_mounts() and use it in for backups and samba shares.
Create a new get_disks() similar to get_mounts() but use df information only for
showing free space. This inverts the importance of 'df' and UDisks. Use UDisks
as primary source of information for showing list of disks and then use df to
fill in the free space information.
- Retrieve all the mount points of a device and return them as part of
get_disks() in an extra 'mount_points' property.
- For storage listing, this fixes showing up of /.snapshots as separate disk and
showing of vboxsf, network mounts etc. Only shows mounts that are related to
block devices.
- Update various uses of get_disks() within storage module to use
'mounts_points' instead of 'mount_point' to be accurate in cases where there are
multiple mounts for a given device. Use get_mounts() where appropriate instead.
- Display all the mount points against a devices in multiple lines.
- Also show devices that are not currently mounted.
Tests performed:
- Filling up a disk shows a disk space warning properly. Warning contains the
free disk space correctly.
- Calling get_root_device(get_disks()) return the correct root device.
- In Deluge, the download directory contains a list of all samba current shares.
If a disk with samba share is unmouted, it does not show up in the list.
- In the Samba app page, all disks are shown properly. Root disk is shown as
'disk'. All other mount points such as .snapshots and /vagrant also show up.
- In the Samba app page, unavailable shares list shows up when a disk with a
share is unmounted.
- Upload a backup, warning on the form shows available disk space properly.
- When adding a backup location. The list includes all mount points. Duplicated
mount points are not shown. Root disk is not shown in the list. When all the
disks are used up for backup location, a warning that no additional disks are
available is shown.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Closes: #1814.
Tests performed:
- Connect with all the mentioned clients to a Samba folder on a FreedomBox.
- Visit all the links in the clients information table.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- Move non-reusable app specific step definitions and helper methods into
<app>/tests/test_functional.py.
- Merge reusable helper methods into plinth.tests.functional
- Merge reusable step definitions into plinth.tests.functional.step_definitions
- avahi, datetime, ikiwiki: Reuse common methods to avoid repetition. Avoid
mapping from app nicknames to actual app names.
- deluge, transmission: Make a copy of sample.torrent for each app to avoid
clogging common place.
- Implement functional.visit() to simplify a lot of browser.visit() calls.
- Ensure that name of the mark on functional tests for an app is same as name of
the app. This will help with predicting the mark when running tests for a
particular app.
Tests performed:
- Run all functional tests.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Add pytest hooks to ignore all functional tests if pytest_bdd is not
installed.
- Update pytest hooks to skip tests in file named 'test_functional.py' if
--include-functional argument is not provided.
- Move functional_tests/install.py into plinth/tests/functional and update
reference in Vagrantfile.
- Move scenario files into individual app folders. Rename them after the app
they are testing. Merge TODO items listed in todo.org into corresponding feature
files.
- Add test_functional.py in each app to build tests from the features file using
pytest_bdd.
- Move all step_definitions, support and data into plinth/tests/functional/.
Include all step_definitions from conftest.py. Update to relative imports
instead of absolute imports.
Tests performed:
- Run py.test-3 --collect-only shows all functional tests and lists 574 tests.
No errors show that name of feature files are correct. The number says that all
functional test features are included.
- Remove pytest_bdd (or modify the import name) and run py.test-3 --collect-only
skips collecting all functional tests and shows only 300+ tests.
- Run functional tests for a few apps with py.test-3 --include-functional -m
app. For storage, deluge.
- Run unit tests with py.test-3. Functional tests are listed by skipped.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Handle groups needed by an app.
- Handle reserved usernames for an app.
- Updated documentation
- Updated unit tests
Tests performed:
- Reserved usernames: ez-ipupd, ejabberd, Debian-minetest, mldonkey,
monkeysphere, mumble-server, privoxy, quasselcore, radicale, debian-tor,
debian-transmission
- Reserved usernames checks should work in the following forms:
- Create user
- Update user
- First boot user creation
- Full list of available groups should appear in following cases:
- Create user form
- Update user form
- Full list of groups should get created in Django DB during:
- Update user form display
- First boot form save
- When updating the last admin user, the 'admin' group choice is checked
and disabled.
- Following groups show up (sorted by group name):
- bit-torrent: Download files using BitTorrent applications
- git-access: Read-write access to Git repositories
- i2p: Manage I2P application
- wiki: View and edit wiki applications
- minidlna: Media streaming server
- ed2k: Download files using eDonkey applications
- freedombox-share: Access to the private shares
- web-search: Search the web
- syncthing: Administer Syncthing application
- feed-reader: Read and subscribe to news feeds
- admin: Access to all services and system settings
- Directory validation form checks for write permissions for following apps:
- deluge with debian-deluged user
- transmission with debian-transmission user
- Sharing app should show all the groups in add/edit share forms
- The following apps should get added to share group during setup:
debian-transmission
debian-deluged
- Unit tests pass
- Functional tests for users and groups pass
- Test that an app (example syncthing) provides the necessary
permissions to users in that group (but not in admin group).
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
[sunil: Fix i18n of group descriptions]
[sunil: Update developer documentation]
[sunil: Separate out cosmetic changes]
[sunil: Fix component ID for mumble]
[sunil: sharing: Remove unneeded dependency on users app]
[sunil: Implement better API for getting groups in component]
[sunil: Fix incorrect regression change ttrss app]
[sunil: Make iterating over gourps more readable]
[sunil: Improve tests, drop single use fixtures]
[sunil: Simplify test_view.py fixture]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Tested-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
