Tests:
- On unstable container, the test fails before the patch and passes after.
- On stable, testing, and unstable containers, unit tests pass.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- When waiting after a auto-client-add operation, sometimes, it is not detected
that server connection exists. Then a new server setup is triggered and this
causes a duplicate wireguard server connection created. Fix this by making wait
operations strictly read-only.
- Also add more safety checks during waiting based one of the seen failures.
Tests:
- Functional tests work.
- Auto add client works much more reliably.
[jvalleroy: Update docstring]
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Previous changes introduced a regression where QR codes and configuration
download stopped working. This is because of removal of private key from
session. Fix this.
- Provide the QR code and configuration download inline so that private key does
not have to stored in session.
- Provide separate QR code and configuration for each of the available
endpoints.
- Move the manual parameters into a separate table for each of the endpoints.
Make it look like this is only needed as the last option.
- Immediately add the client when the page is presented instead of additional
step (there is no use input needed).
- Tone down the warnings into simple text.
- Provide additional parameters in the manual configuration parameters tables to
make it easy to configure (based on the parameters configured on the WireGuard
app for Android). Use terminology that is used in app so that the fields can be
mapped easily by the user.
Tests:
- Functional tests work more reliably now.
- Clicking on the 'Add Client Automatically' creates the client successfully. A
new message is shown with client public key. The description looks good.
- Clicking on 'Download config file', 'Show QR code' and 'Show config
parameters' works. Downloaded configuration file works. QR code works too and
fills in expected parameters. Shown manual parameters are correct.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Some changes in the 'New' menu and a new introduction animation broke the
functional tests. Fix this by updating the way elements are searched for in the
interface.
Tests:
- Functional tests for Nextcloud pass.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Rename manual page from plinth.1 to freedombox.1
Tests:
- Running 'make build install' and 'systemctl daemon-reload' and 'systemctl
restart plinth.service' works. Installing new app works.
- Spawning a new stable VM with the changes works. First wizard works.
Installing new app works.
- On a fresh Trixie machine, install freedombox. Then upgrade to a deb with
these changes. The service continues to work. Installing an app also works.
Binary is now /usr/bin/freedombox. /usr/bin/plinth works but it is a symlink to
/usr/bin/freedombox.
- Build a Debian package and install it on Trixie machine with freedombox
package installed. 'man plinth' works. 'man freedombox' works. Manual page
contents shows changes from 'plinth' to 'freedombox'. plinth.1.gz is a symlink
to freedombox.1.gz.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Functional tests run much more reliably. Although there were several failures
still observed due to following reasons:
- Due to FreedomBox service receiving SIGSEGV (presumably during NM DBus
operations).
- Error something like Invalid UTF-8: setting not known during removal of
a client.
- Unknown failures caused by newly added clients not showing up on the page.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- This does not effect the existing flow much but is a problem when waiting for
the public key to show up in list of peers.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- When no domains are configured, and .local domain is filtered out, an
exception is thrown by the auto-add client page.
- Don't filter out .local domain. It is still a valid endpoint for peers to
connect to.
- Instead of showing just one domain, show all the domains as endpoints to
connect to.
- Don't store private key in the session. It is retained for longer than
necessary and also sessions are stored on the disk.
Tests:
- Remove all configured domains from the system and click 'Add Client
Automatically' button. It throws an exception. With the patch, it works.
- The Add Client Automatically page shows all the domains as endpoints.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- When Nextcloud is enabled, /.well-known/{card,cal}dav URLs are taken over by
Nextcloud. So relying on them makes radicale fail. Instead just check for the
web interface to be available.
Tests:
- Enable Nextcloud and run radicale functional tests. Without the patch tests
fail and with the patch, tests succeed.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- When Nextcloud is enabled, it takes over the .well-known URLs. We don't want
the redirect result to be cached resulting in wanted behavior.
Tests:
- curl -k https://192.168.122.87/.well-known/caldav and curl -k
https://192.168.122.87/.well-known/carddav results in 302 Found responses
instead of 301 permanent redirects.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- We write to a file and immediately this file is consumed by the virsh command.
If the file is not flushed, the virsh command will see an empty file.
Tests:
- Without the change, virsh fails with an error message that the definition file
is empty. With the change, the failure goes away.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Migration files have already been renamed from plinth/migrations/*.py to
freedombox/migrations/*.py. When running these migrations, ensure that database
tables are first created with plinth_* names rather than freedombox_*. This is
because we want the database progression path for fresh installations (with not
tables) as well as the old installation (with plinth_ tables) to be the same. To
achieve this, migrations.CreateModel will be provided with db_table=plinth_*
values.
- Ensure if a migration call (plinth, 0001_initial) ran, then the (freedombox,
0001_initial) is not run again. This is achieved by adding replaces = [] in the
newly renamed migration.
- Create a new migration that renames plinth_* tables to freedombox_*.
- Fix an old migration (0003) to use historic model rather than current model.
This ensure that it uses the plinth_ table during migration rather than
freedombox_ table.
Tests:
- Delete the database and start plinth.service with all the patches. Notice that
the database migration (fresh creation) works well. First setup, first wizard,
bepasty app installation, and notifications work as expected. Notice that
django_migrations table contains entries for (plinth,000[1-6]*) as well
as (freedombox,000[1-7]*).
- Delete the database and start plinth.service without the patches. Run first
setup and wizard. Install bepasty. Then apply the patches and restart
plinth.service. Notice that the database migration (renaming of tables) works
well. First setup is already done. First wizard is not shown. bepasty is shown
as installed. Previously shown notifications are retained . Notice that
django_migrations table contains entries for (plinth,000[1-6]*) as well
as (freedombox,000[1-7]*).
- Delete the database and start plinth.service from trixie version. Run first
setup and wizard. Install bepasty. Then apply the patches and restart
plinth.service. Notice that the database migration (renaming of tables) works
well. First setup is already done. First wizard is not shown. bepasty is shown
as installed. Previously shown notifications are retained . Notice that
django_migrations table contains entries for (plinth,000[1-6]*) as well
as (freedombox,000[1-7]*).
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Closes: Debian #1144740.
- When one of the applications such as bepasty, radicale, or searx need it, then
install it.
- Reduces the number of dependencies for freedombox package.
- Reduces size of the disk image.
- Ensures that uwsgi does not run on every freedombox machine.
- Apache's proxy_uwsgi module (provided by apache2-bin, apache2) can still be
enabled by default because uwsgi is not a dependency for the Apache module and
uwsgi socket connections are not attempted until specific configuration is
enabled and requests arrive.
- Change dependency from uwsgi-core to uwsgi. uwsgi-core does not have init
scripts but uwsgi package has init script (but only on trixie and not forky and
up). The init script is disabled and masked by bepasty, radicale, and searx
apps. So, this should not be a problem.
Tests:
- On a freshly installed Debian forky and trixie machines, install freedombox
deb package built with changes. Installation succeeds. uwsgi is not installed at
all. bepasty and radicale can be installed and basic requests to web UI work.
uwsgi init script is not started and is masked.
- Functional tests for bepasty and radicale work.
- On a Trixie machine, setup freedombox from trixie. Then install freedombox deb
package with the patch. uwsgi is not marked as manually installed and running
unattended-updates will remove it. Install bepasty and uwsgi package is
installed and marked as manually installed.
- On a Trixie machine, setup freedombox from trixie. Install the bepasty app.
Then install freedombox deb package with the patch. uwsgi is marked as manually
installed and running unattended-updates will not remove it.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- On Coturn app page, clicking on a tag redirects to Add New App page with tag
filter set to clicked tag.
- On Names app page, clicking on a tag redirects to system page with tag filter
set to clicked tag.
- On Operations page such as when installing an app, clicking on a tag redirects
to Add New App page with tag filter set to clicked tag.
- On Index page such when OpenVPN is clicked description for OpenVPN is shown.
Clicking on a tag in the description redirects to Add New App page with tag
filter set to clicked tag.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Instead of the apps page which will be empty on first boot.
Tests:
- On Next Steps page, click on apps link takes users to add apps page and not
apps page.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
