Tests:
- On unstable and testing:
- Ran functional tests for upgrades.
- Ran actions "upgrades setup" and "upgrades setup-repositories".
- On testing:
- In develop mode, activated backports.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- 50freedombox4.pref handles freedombox package from current
backports. Whenever upgrading to a new Debian release, backports can
be activated for the new release, and will always include the
freedombox package at the start.
- 51freedombox-apps.pref handles apps, and each entry is particular to
a Debian release. For example, after bullseye release, entries from
bullseye-backports can be added, and entries from buster-backports
can be removed.
Tests:
- In testing container, run setup in development mode. Apt preferences
files have the expected content.
- In stable vagrant box, install deb with these changes. Apt
preferences files have the expected content.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- If backports is for older release, then it can be activated again to
upgrade to latest release. (Plan is to make this automatic, but
leave the manual option as a fallback.)
- Security notice still shown if older backports are enabled.
Tests:
- On Buster system, change distribution in
/etc/apt/sources.list.d/freedombox2.list to
stretch-backports. Updates page shows button to activate backports
again. Activate and check the source list to confirm that it has
buster-backports again.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Tests:
- Build deb and install in buster image. Manually remove backports
sources file. Security page does not show backports notice. Updates
page shows button to activate backports.
- Activate backports from updates page. Success message is shown and
button to activate backports is removed. Security page shows
backports notice.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Although useradd recommends starting with either a lowercase letter or an
underscore, there is nothing that consistently adheres to this recommendation
across systems. Because some systems do not follow this recommendation and this
recommendation is not a hard requirement, we should not prevent connections at
the validation stage.
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Tested that after this change, only admins can see the MiniDLNA
statistics page https://<freedombox>/_minidlna/ over the web.
Everybody can still see the page on local network using
an address http://<freedombox>:8200/
MiniDLNA web page shows how many media files are served and
some information (IP, MAC address) about the connected clients.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
From documentation[1][2], it appears that the proper way to rename the source
package is simply to change the source package name. The binaries will be
treated generated from a new source package name. The old source package will
then not have any binaries associated with it. This will prompt the 'dak
cruft-report' tool to automatically remove the old source package[3]. No further
action will necessary to remove the old source package.
Links:
1) https://wiki.debian.org/RenamingPackages
2) https://www.debian.org/doc/manuals/developers-reference/pkgs.html#moving-removing-renaming-orphaning-adopting-and-reintroducing-packages
3) https://wiki.debian.org/ftpmaster_Removals
Tests:
- Build .deb package. Package is built successfully. Source package name is
'freedombox'.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Tests:
- Interface shows Lato font as usual in apps and system pages.
- Build .deb package. Lintian does not show a warning related override for the
TTF font.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Used a function from the standard library instead.
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Tested against ejabberd's failing installation. The entire test suite
gets marked as failed if the application installation fails.
Fixes#1902#1895
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- Ignore errors while trying to expand a file path list into its .d components
path list.
- Ignore errors when reading shortcuts fails a file for any reason.
- Errors when reading configuration file already ignored. os.path.isfile() and
configparser.Configparser.read() do not raise an exception under any
circumstances.
Analysis:
Regression in 20.12 reported at
https://discuss.freedombox.org/t/fb-20-12-solved-plinth-fails-to-start-due-to-new-frontpage-py-shortcuts-and-filesystem-permissions/994/4
- freedom-maker creates /var/lib/freedombox/ with mode 755 as root but this only
applies for disk images.
- freedombox.postinst, networks, apache check for the existence of
/var/lib/freedombox/is-freedombox-disk-image .
- Samba creates /var/lib/freedombox with mode 755 as root.
- Backups creates /var/lib/freedombox/borgbackup but not the parent directory?
- Shortcuts are now read from /var/lib/freedombox/.
Tests performed:
- Create directories /var/lib/freedombox and /etc/freedombox with permission set
to 750. In case of configuration, an early warning message is printed and in
case of shortcuts warnings are printed but service starts properly. Changing the
permission to 755 removes the warnings.
- Ensure 755 permission on above two directories. Create non-empty files
custom-shortcuts.json and freedombox.config with permissions 640. In case of
config no warning is printed (silently ignored) and in case of shortcuts,
warning is printed that file could not be read but service starts properly.
Changing the permission to 644, no warnings are printed.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Change "overtime" to "over time", also matches the other choice in the
form.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Tests performed:
- Fonts Lato is properly and displayed.
- No <frame>, <iframe>, <video>, <audio>, <track>, <embed>, <object>, <applet>
tags are used in FreedomBox source code.
- Checked that there are no images referring to external URLs. Most of the
common images such as apps lists, system list, networks and manual show images
properly.
- Styles specified in main.css work as well as page specific styles such as in
networks. Firefox developer console shows inline styles loaded.
- JSXC is able to make XHR requests to ejabberd.
- Able to launch <a> links with _target='blank' such as in /help/support/.
- When visiting external websites, such as in donate page, Referer header is not
sent. When visiting page within FreedomBox interface, Referer header is sent
with path.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- Implement ability to refresh page at the framework level so that every page
does not need to handle it.
- Refresh after number of seconds specified in context of the view.
Tests performed:
- Trigger the following functions and ensure that page reload after 3 seconds
during the running operation while it does refresh before and after the
operation.
- Diagnostics tests from the module.
- Gitweb repository cloning.
- Monkeysphere publish key to server.
- OpenVPN setup.
- Tor configuration update.
- Manual software update.
- App installation.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Tests performed:
- Submit a form and notice that button has a spinner soon after click.
- Select a from like Gitweb repository creation form and submit it. After submit
go back to previous form using back button. Notice that button has been restored
to proper state.
- Without filling valid information the form, press submit. Notice that the
button does not change to a spinner.
- Check installing an app, snapshots management, network forms, wireguard forms,
etc.
- Test on Firefox and Chromium.
- Test with LibreJS that the script is accepted as valid free software license.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
