In the event containers are being used on the server with images, attempting to
auto-mounting loop devices could interfere with their operation. We currently
don't have a use case where a user would want to auto-mount loop devices.
Initially suggested in
https://salsa.debian.org/freedombox-team/freedombox/-/issues/1854
Tests performed:
- Add a loopback device as follows and observe that is automatically mounted.
dd if=/dev/zero of=/tmp/test_disk bs=1M count=100
mkfs.ext4 /tmp/test_disk
losetup loop0 /tmp/test_disk
umount /dev/loop0
losetup -d /dev/loop0
- Add a loopback device as follows and observe that both partitions are mounted.
dd if=/dev/zero of=/tmp/test_disk bs=1M count=100
parted /tmp/test_disk
mklabel gpt
mkpart Part1 ext4 0% 50%
mkpart Part2 ext4 50% 100%
kpartx -avs /tmp/test_disk
mkfs.ext4 /dev/mapper/loop0p1
mkfs.ext4 /dev/mapper/loop0p2
umount /dev/mapper/loop0p1
umount /dev/mapper/loop0p2
kpartx -dvs /tmp/test_disk
- When --develop is removed or when code is modified to negate the not
condition, the partitions are not auto-mounted in the above cases.
Reported-by: James Valleroy <jvalleroy@mailbox.org>
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
This rule imported originally from udiskie's defaults seems somewhat arbitrary.
We attach a SATA drive with partitions, it mounts them. However, if the entire
drive is a file system, it does not auto-mount.
Tests performed:
- In VirtualBox, attach a SATA drive. Create two partitions and filesystems in
them. Both filesystems are auto-mounted.
- In VirtualBox, attach a SATA drive. Format the entire drive as a filesystem.
The filesystem is auto-mounted.
- Same behavior is observed with loop devices.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
In future, we may consider showing disks that are not mounted and allow mounting
them manually or unlocking encrypted volumes manually. Prepare for that
scenario.
Tests performed:
- Edit get_disks() code to show not mounted disks. The progress bar or free
space information should not be shown.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Rename get_disks() to get_mounts() and use it in for backups and samba shares.
Create a new get_disks() similar to get_mounts() but use df information only for
showing free space. This inverts the importance of 'df' and UDisks. Use UDisks
as primary source of information for showing list of disks and then use df to
fill in the free space information.
- Retrieve all the mount points of a device and return them as part of
get_disks() in an extra 'mount_points' property.
- For storage listing, this fixes showing up of /.snapshots as separate disk and
showing of vboxsf, network mounts etc. Only shows mounts that are related to
block devices.
- Update various uses of get_disks() within storage module to use
'mounts_points' instead of 'mount_point' to be accurate in cases where there are
multiple mounts for a given device. Use get_mounts() where appropriate instead.
- Display all the mount points against a devices in multiple lines.
- Also show devices that are not currently mounted.
Tests performed:
- Filling up a disk shows a disk space warning properly. Warning contains the
free disk space correctly.
- Calling get_root_device(get_disks()) return the correct root device.
- In Deluge, the download directory contains a list of all samba current shares.
If a disk with samba share is unmouted, it does not show up in the list.
- In the Samba app page, all disks are shown properly. Root disk is shown as
'disk'. All other mount points such as .snapshots and /vagrant also show up.
- In the Samba app page, unavailable shares list shows up when a disk with a
share is unmounted.
- Upload a backup, warning on the form shows available disk space properly.
- When adding a backup location. The list includes all mount points. Duplicated
mount points are not shown. Root disk is not shown in the list. When all the
disks are used up for backup location, a warning that no additional disks are
available is shown.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
In ed09028fcd2c850c3b87b65de66187b214190150, when eject was made to run as
superuser inside storage action, parsing of the error messages was not handled
properly. Fix it to show simple error messages about why the eject was not
successful.
Tests performed:
- In a terminal, switch to the directory where a disk is mounted to keep the
mount point busy. Attempt to eject the disk. A large stack trace is shown
without the patch and a clean error message is shown with it.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Bring us closer to avoiding the use of two different methods to access UDisks
DBus API: UDisks2 client library and direct DBus access with GDBus.
Perform formatting of the bytes outside of udisks2 module to avoid depending on
Django.
Tests performed:
- Visit the storage page. Disks are listed properly.
- Sizes are formatted to be human readable.
- Filesystem type is show properly: ext4, btrfs
- Labels for disks are shown as set by tune2fs etc.
- Device paths are shown properly.
- Mount point is shown properly.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Catch exeptions if web server restarts on form submit.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
The make-ssl-cert command is used during initial setup so it is a hard
dependency. Earlier it was being included as a Recommends: via apache2 package.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Manual update is placed in a new section under Configuration.
Tests:
- Ran manual update with packages to be upgraded.
- Busy indicator is shown as expected.
- Log display button appears when logs are available.
- Logs can be expanded and collapsed.
Closes: #1771.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Change the update now button into default priority button]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- By waiting for one app to finish installing before trying to install.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Splinter/selenium have implicit and explicit waiting time. Implicit wait time
will make every negative lookup wait for about 3 seconds before it actually
fails. Because we ensure missing elements in quite a few places, this introduces
many 3 seconds wait periods during testing. Remove it instead rely on explicit
waiting whenever needed.
- Explicit wait time is only used during explicitly requests waiting conditions.
In a loop the API waits for a maximum of timeout period until a given condition
is satisfied. Each time the condition is checked, it goes into sleep for
explicit wait period amount of time. This is typically a second or so. Since we
are impatient, make it 0.1 instead.
- Also make sure that whenever a page is visit()ed, we automatically wait until
the page is fully loaded by overriding the splinter wait condition. Otherwise,
we will need to introduce waiting code in a lot of places.
- Using document.readyState == complete is a better check to ensure that a page
is fully loaded. If we proceed with the page 'loading' or 'interactive' state,
we will have to change a lot of code to make it wait.
- Handle Apache restarts when waiting for page load. The error page apparently
is never reaches document.readyState == 'complete'. So, if an error page is
encountered, always reload.
- While waiting for installation, ensure that we atomically check that page has
loaded fully and the installation progress is not being shown. Otherwise, there
would be race condition due to installation page refreshing itself.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- When 'relogin' hit is seen after page load, reload the page instead of trying
to login as it does not always succeed.
- Wait after the page load until the connection with jabber server has been
checked.
- Wait until the roster appears after login.
- Wait until contact appears after contact is added.
- Wait for popups and dialogs when deleting the contact.
- Wait for contact to appear when checking for contact. Don't reload on every
check.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Don't depend on number of snapshots being 0 to conclude that all snapshots have
been deleted instead use the disabled state of the 'Delete Selected' button.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Whenever functional tests for user app are run, the tester user is left with
the last language that is tested. This is a minor inconvenience. Fix this by
adding no-language option to test at the end.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Fix the condition for checking if we are on progress page by ensuring that the
page is loaded fully before checking if it is that progress loader. Avoid a race
condition writing a single atomic JS script to check both conditions.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- When subscribe button is clicked in subscribe dialog, the dialog does not
close immediately. Wait until it closes or error appears.
- When a feed is added, the feed list refreshes and during that time, it is not
possible to click on the feed expand button. Wait until it can be clicked.
Extend the eventually() method to wait on exceptions and not just false values.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
When the page is initially loaded, torrents don't appear. It is later loaded
using an AJAX call. Wait until we find the torrents we need.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Comparison of dependencies of Debian packages for versions 1.13.0 and 1.15.0
show that there no new dependencies and no increase in version requirements for
dependencies. Hence changes to backports pin priorities is not needed.
Tests executed:
- Install older version of matrix-synapse. Run unattended upgrades. It will
refuse to upgrade matrix-synapse.
- Run freedombox, and run apt update, the upgrade for matrix-synapse is
performed by freedombox. The setting for MAM is kept during the upgrade.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Tested-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Do not enable/start service during package install/upgrade
- Configure needrestart to skip restarting service
Closes: #1638.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Provide proper regex string in needrestart configuration with qr()]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
During provisioning of container/VM, we need to run --list-dependencies. When
run without --develop, they are unable to create database. When run with
--develop, the output from the database migration process is messing up the
output meant for stdin as it is outputting to stdout instead stderr. Reduce
verbosity even in debug mode to fix this.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
See #1841 for discussion on why Turbolinks needs to be removed.
Closes: #1841.
Closes: #1804.
Tests performed:
- There are no more references to 'turbolinks' in source code other than .po(t)
files and the manual.
- When loading a page, turbolinks.js is no longer loaded.
- The following links don't have data-turbolinks attribute and work well when
clicked.a
- Gitweb repository links
- Download manual links (en, es)
- Ikiwiki wiki links
- Sharing app web share links
- TT-RSS mobile app link
- 'Launch web client' button
- 'Launch' button in web section of clients table
- Active and regular front page shortcut
- Roundcube does not have a link to /roundcube in description.
- turblinks not present in /static/jslicense.html . LibreJs accepts all scripts.
Reported-by: Veiko Aasa <veiko17@disroot.org>
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Tested-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
This is to make Pagekite use certficates shipped by Debian. Otherwise by
default, it uses internally shipped certificates that may be outdated. See:
https://pagekite.wordpress.com/2020/05/30/tls-certificate-validation-issues/
Tests performed:
- Without the patch, configure pagekite with a proper account. Notice that
pagekite fails to connect to the server due to SSL failures.
- Stop FreedomBox, apply the patch, run ./setup.py and run FreedomBox. File
/etc/pagekite.d/90_freedombox_certs.rc is present. Pagekite is restarted by
restarts. It start connecting to the server successfully.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
[jvalleroy: Fix typo in comment]
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Also properly stylize the app name as done on project website.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- We are mention in the internal zone warning that services are available when
connected over VPN.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
When showing the internal zone warning.
Closes: #1312.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
