- This helps the case where an user installs FreedomBox on Buster and then after
finishing the first boot wizard and before repositories have been setup,
upgrades to latest FreedomBox version.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
It is confusing to combine the user's intent of wanting to have backports
activated with whether they have actually been configured in the system.
- Separate out checking for requested which is a key in the kvstore from enabled
which is about checking system configuration for backports.
- Implement convenience method for setting whether user requested backports.
- Do not base the status display (in security and upgrades modules) on the
configuration status and instead focus on user intent.
- If user requested backports but they have not been enabled yet due to not
being available, show as activated. System will keep trying the background and
configure eventually.
- If user requested backports but their configuration is outdated yet due to
newer release, show as activated. System will keep trying in the background
and configure latest settings eventually.
- In all places where backports enabling is being checked, split the logic for
'can be activated' from 'already activated' and 'user requested activation'
properly.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Closes: #1855.
Tests:
- On unstable, first boot step is not shown. Backports are not
enabled.
- On testing, tested enabling backports at first boot step. Backports
are enabled.
- On testing, tested not enabling backports. Backports are not enabled
and can be activated later.
- On testing, confirmed that functional tests can click through the
first boot step.
- On stable with backports, first boot step is not shown. Backports
are enabled.
- On stable, tested enabling backports at first boot step. Backports
are enabled.
- On stable, tested not enabling backports. Backports are not enabled
and can be activated later.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Avoid two different i18n strings with almost same content]
[sunil: Use box_name instead of hardcoded FreedomBox name]
[sunil: Use consistent terminology 'activate' instead of 'enable']
[sunil: Rename the wizard, form, view, url for consistency with existing code]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Backports are not enabled and cannot be activated on unstable.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
[sunil: Add statement that backports may not be necessary]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Now it is possible to change default branch when editing a repository.
Gitweb site shows default branch as a main branch and the 'git clone'
command checks out to default branch.
Added unit and functional tests. Splitted one large 'test_actions'
into multiple tests.
Tests performed:
- All gitweb unit and functional tests pass.
- Created a repository from a remote repository which has default
branch other than master. Confirmed that the 'Edit repository'
page shows correct branch and gitweb site shows this branch as
a default branch
Closes#1925
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- When port forwarding configuration is not required in the router, don't show
the ports information.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- API can be consumed by other apps.
- Consistently, get/set store keys and default values without repeated code.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- Start showing port ranges properly.
- Fixes issue with Coturn TURN relay ports not being shown.
Closes: #1851.
Tests:
- Visit each of affected apps and see the port forwarding information. The
information is same as before.
- HTTP and HTTPS ports are not shown.
- Coturn app shows additional port ranges for TURN relay ports.
- Shadowsocks app does not show port forwarding information as it is internal
only.
- Visit one of the apps not effected by the patch. There is no section related
to port forwarding.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Solves #1907 for JSXC and Sharing pages. WireGuard is not yet included in the
manual and missing pages show an ugly error.
Signed-off-by: Fioddor Superconcentrado <fioddor@gmail.com>
[sunil: Formatted using yapf]
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Prevent leaking private info through Tor onion service or Pagekite.
Tests:
- When starting plinth, apache setup is run. Status module is
disabled, and apache2 is restarted.
- sunil: After upgrade, status page is not available.
- sunil: mod_status is available in stable (2.4.38-3+deb10u3) and
testing/unstable (2.4.46-1).
Closes: #1935.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Tested-by: Sunil Mohan Adapa <sunil@medhas.org>
* Fixes the gitweb app initalization when there are no public
repositories and the apache2 configuration gitweb-freedombox-auth has
not been enabled before (this may happen when the git repositories or
apache2 configuration has been modified outside the plinth web UI).
* Fix comment in the gitweb-freedombox-auth.conf apache2 configuration
file.
Fixes#1928
Tests performed:
* The gitweb app unit and functional tests pass.
* Configured all gitweb repositories as private. Stopped the plinth
service. Disabled the apache2 configuration gitweb-freedombox-auth.
Then starting the plinth service succeeds and gitweb-freedombox-auth
configuration gets enabled.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
The word "Manual" means 'user guide' in case of help and 'not automatically' in
case of networking app.
After change, POT file is produced as follows:
msgctxt "User guide"
msgid "Manual"
msgstr ""
msgctxt "Not automatically"
msgid "Manual"
msgstr ""
Closes: #1922.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
Tests:
- Click on diagnostics menu item in any app. Notice that running status does not
show up.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Stick to a subset of allowed configuration file syntax (full syntax). Only KEY
= VALUE statements are allowed. Values can be full JSON (valid python).
- Use augeas to read as key/value pairs and then parse the values in JSON.
- Add convenience methods to read and write configuration files.
- Read the entire configuration file in a single action.
- Internationalize the permission strings displayed to the user.
- Pass password during remove-password operation via stdin instead of command
line.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Since a password without any permissions is not useful.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Make them slightly more verbose. Avoid text in parenthesis.
- 'Web link' is likely more easily associated with URL than 'web address'.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
Compared to other apps that do file sharing, sharing snippets that can be viewed
in the browser is a unique distinction of bepasty.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
- Make fixtures more specific to avoid potential clashes with functional BDD
test fixtures of other apps.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
Tested to work alright after wsgi is restarted. Checked permissions on the
socket file /run/uwsgi/app/bepasty-freedombox/socket.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Joseph Nuthalapati <njoseph@riseup.net>
