Allow distribution to be passed as an environment variable.
Fixes#1914
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
- Improved readability.
- Changed hierarchy of headings.
- Reduced emphasis on unnecessary/redundant things.
- Added links to go back to the main websites.
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Update security_report.html text to clarify what vulnerability total
numbers mean, and give more info to learn what the vulnerabilties are.
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
[jvalleroy: Make URL a link]
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Closes: Debian #805108.
Primary motivation is to provide swap for FreedomBox machines. On all FreedomBox
images, currently there is no swap configured. Swap on disk may not be good for
SBCs most of which use SD card for storage. We wish for processes to not get
killed when hard memory limit is reached.
Zram seems like a good solution to the problem suitable not only for SBCs but
also for desktops and bigger machines. Fedora is currently using Zram as its
default swap solution configured by the installer. Zram creates a block device
with a configured size. Writing blocks into the device compresses them and
stores them in RAM. This block device can be configured as swap among other
things. See:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/admin-guide/blockdev/zram.rst
Set the size of the swap to be 50% of RAM. Expected compression is about 1:2.
That means, in an average case, 25% of RAM is consumed to provide the swap
device. This results in the system being able to consume about 125% of RAM
capacity to run processes. This value is inspired by Fedora.
https://fedoraproject.org/wiki/Changes/SwapOnZRAM .
Zram based swap takes priority over disk based swap (due the priority being set
to 100). This reduces IO and improves latency on machines that already have a
swap device.
On containers, zramswap.service fails to start as it will not be possible to
insert the 'zram' kernel module from within the container. This should not cause
any further problems.
Since 'config' app is an essential app, zram-tools now becomes a hard dependency
of freedombox package.
For FreedomBox images, zram-tools will be pre-installed and pre-configured. So,
it will work on first boot. For users installing FreedomBox via apt or those
upgrading from an older version, zram-tools will be newly installed but
configuration will not be picked up until the next reboot. Restarting
zramswap.service is not done because it may not be a safe/successful operation.
systemd-zram-generator is a project that essentially does what zram-tools. It
appears to be a better implementation and we may migrate to it when it becomes
available in Debian. Migration expected to be straight forward.
Tests performed:
- Running `sudo -u plinth ./run --list-dependencies` shows zram-tools as a
dependency.
- On a container, `systemctl status zramswap.service` shows as failed.
- On a virtual machine, confirm that configuration is installed properly. Run
`./setup.py install; systemctl daemon-reload; systemctl show zramswap.service |
grep Environment`.
- On a virtual machine, ensure that you have more than 512MiB or RAM. Then
restart zramswap.service. This should create a swap space of 50% of RAM
capacity. Confirm with `free` and `zramswap status`.
- Restarting the VM retains the swap that has been setup.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Helps: #664.
Currently, logs are written to disk twice, once by journald and once by rsyslog.
rsyslog may log to multiple locations depending on the type of the log. To
reduce disk I/O, disable rsyslog and rely solely on systemd journal.
Place the code in config module as there is no better place for it currently
without creating a new module. Can be sorted later.
The following files under /var/log/ are no longer populated on FreedomBox. They
will be rotated away over a few days. Use journalctl instead to view the
messages:
- syslog
- messages*
- auth.log*
- debug*
- daemon.log
- kern.log
- lpr.log
- mail.log
- mail.info
- mail.warn
- mail.err
- user.log
Tests performed:
- On a machine with rsyslog running, run ./setup.py install and start FreedomBox
service. This triggers the config app's setup. rsyslog is disabled and masked.
systemd-journald is restarted.
- Even when rsyslog is unmaked and enabled manually, systemd journald does not
forward message to syslog anymore.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Tests:
- Disable fail2ban. When version number of the app is incremented, setup is run,
fail2ban is reloaded but fail2ban is not enabled after setup.
- Disable fail2ban. When app is uninstalled and FreedomBox is run, setup is
performed and fail2ban is enabled.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Since security app manages fail2ban, it makes sense to set the default
configuration in this app.
Tests performed:
- `./setup.py install` installs the file in the correct place.
- Only 10 incorrect SSH login attempts as noticed in the fail2ban log will
result in ban.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
- This allows disabling syslog daemons.
- Fall back to using file based monitoring for Apache.
Tests performed:
- Before and after the patch, connecting via SSH and typing in incorrect
password leads to a entry in fail2ban.log. 10 incorrect attempts result in a 10
minute ban.
- Before and after the patch, typing in incorrect password for radicale leads to
a entry in fail2ban.log. 10 incorrect attempts result in a 10 minute ban.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Add the debian-deluged user to the freedombox-share group *before* running
app setup. The app setup process restarts the deluged daemon
after which the process has correct group ownerships.
Tests done in Debian stable and testing dev containers:
- After installing the deluge app, checked from /proc/--process-id--/status that
the deluged daemon process has the freedombox-share group.
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Add nslcd.service as a dependency to the services that depend on users
and groups defined in LDAP. deluged, mldonkey-server, syncthing@syncthing
and transmission-daemon services depend on freedombox-share LDAP group.
Closes#2061
Tests done with apps deluge, mldonkey, syncthing and transmission,
in both debian stable and testing dev containers, after applying changes:
- After installing an app and after reboot, the daemon user is a member
of the freedombox-share group.
- Checked with the `systemctl show` command that nslcd.service is added to
After=... dependencies.
- All the functional tests pass (in Debian stable, closed manually
the syncthing usage reporting form - #2059).
Signed-off-by: Veiko Aasa <veiko17@disroot.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Sunil:
- Minor update to the TURN server message.
- Drop updating the FAQ link since there may not be much time for translators to
translate the changed message due to our current release schedule. The old link
still works.
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
- Matrix Synapse will automatically pick up the locally installed coturn server
during its installation. This handles only the case where coturn is installed
and configured with a valid TLS domain name before matrix-synapse is installed.
- Allow overriding STUN/TURN config. Matrix Synapse uses the local coturn
server's configuration by default. However, an administrator can override the
STUN/TURN configuration from FreedomBox web interface. Allow administrator's
overrides to co-exist with FreedomBox's managed STUN/TURN configuration.
Administrator's configuration, if it exists, always overrides FreedomBox's
managed configuration. Any updates to FreedomBox's managed configuration will
have no impact on the administrator's configuration since the latter takes
precedence.
Sunil:
- Collapse multiple turn actions into a single one for simplicity. Sending empty
configuration means removal of the configuration.
- Ensure that when removing configuration file is idempotent.
- Manage TURN configuration even when app setup is not yet completed. This fixes
issue with TURN configuration not getting setup on app installation and setup.
- Fix issue with TURN configuration getting updated on form submission even when
the field is not changed. This is due to mismatch between the browser submitted
\r\n with the internal \n.
- Simplify JavaScript for the form and attach handlers only after DOM is ready.
- Drop the no-JS message since the loss of functionality is trivial and to
reduce translation burden.
- Fix issue with URIs and secret parameters not getting updated unless the
managed checkbox changes.
- Drop specialized success messages for TURN configuration update to reduce
translation burden.
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Sunil:
- Join the string in the template instead of the view.
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Sunil:
- Add TurnConfiguration to reference documentation. Add more details in
docstrings.
- Rename the component to TurnConsumer since 'Component' in the name is
redundant and unconventional. Also, hopefully, the component will retain the
API over multiple TURN servers.
- Log when notifying other components about configuration change.
- Use TurnConfiguration class more widely.
- Refactor for simplicity.
- Additional tests.
- Move URI generation code into TurnConfiguration.
Signed-off-by: Joseph Nuthalapati <njoseph@riseup.net>
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: Sunil Mohan Adapa <sunil@medhas.org>
Avoid high CPU usage due to uwsgi continuously restarting before searx
config is upgraded.
Helps #1644.
Tests: Ran dist-upgrade for each case:
- Without searx installed -> no log messages related to searx.
- With searx installed but not enabled -> searx config is upgraded.
- With searx installed and enabled -> searx is disabled, later config
is upgraded, and searx is re-enabled. Searx page can be accessed at
the end.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
Fixes: #2049.
This is regression introduced by me in 213cf16f8daa66dbfd3c761a61483c959c753559.
Although this case was tested for regression, the test setup was incorrect.
Tests:
- In networks page to details of a connection, the Delete button is aligned to
the right.
- In snapshots page, the Create Snapshot button is aligned to the left and
Delete Snapshots button is aligned to the right. Clicking on the buttons does
not change their position.
Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org>
Reviewed-by: James Valleroy <jvalleroy@mailbox.org>
Allow plinth service to restart an unlimited number of times, with 5
seconds delay.
Test:
- After introducing an error in plinth startup code, the service is
restarted every 5 seconds without limit.
Signed-off-by: James Valleroy <jvalleroy@mailbox.org>
Reviewed-by: Veiko Aasa <veiko17@disroot.org>
